- Home /
- Industry
Industry
Categories for relevant industry sectors.
-
EP4063
GELCOAT EP 4063 is a two component, room temperature curing surface coat. GELCOAT EP 4063 is designed for use in pre-preg carbon fibre tooling, RTM tools, RIM tools, PU moulding tools, vacuum forming moulds, negatives, applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. Learn More -
EP4093
ALCHEMIX GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required. Learn More -
EP420
ALCHEMIX EP 420 is a two component, metal filled, room temperature curing epoxy resin for production of prefabricated support frames, vacuum forming tools and as a back-filling compound for high temperature applications. Learn More -
EP421
ALCHEMIX EP 421 is an extremely high performance castable, two-component, aluminium filled epoxy resin system. The cured system is formulated for the combination of high strength, high glass transition temperature, and thermal properties needed for injection moulding applications. ALCHEMIX EP 421 can produce injection moulds capable of moulding high quality prototype and short-run production parts. The moulds can be built from existing parts and models such as SLA, machined modelboard or other patterns. Learn More -
EP424
ALCHEMIX EP 424 is an aluminium filled, two part epoxy casting system formulated for the construction of tools used in vacuum forming machines and the production of prototypes requiring detail and strength. ALCHEMIX EP 424 can also be used as a general purpose casting resin for situations where a high operating temperature is required. ALCHEMIX EP 424 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings Learn More -
EP425
ALCHEMIX EP 425 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. ALCHEMIX EP 425 is formulated to have fast cure with minimal shrinkage, and is highly polishable. Heat stability up to of 160°C can be achieved with post curing. Learn More -
EP426
ALCHEMIX EP 426 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. ALCHEMIX EP 426 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings. Learn More -
EP4350
ALCHEMIX EP 4350 is a glass fibre reinforced epoxy laminating paste for use as a back filling compound in combination with GELCOAT EP 4062 and ALCHEMIX EP 4062C coupling coat. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. ALCHEMIX EP 4350 is formulated for use in RIM tools, moulds for pre-pregs and applications requiring high heat resistance. Learn More -
EP4352
ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More -
EP4385
Two-part iron reinforced slump resistant epoxy repair system. Learn More
Categories
Filter
- Industry
- Application
-
- A translucent (1)
- Adhesive for Epoxy and Polyurethane modelboard. (1)
- Adhesive for M1300 (1)
- Adhesive for M301 (1)
- Adhesive for M651 (1)
- Back filling for foundry patterns (1)
- Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
- copy models (2)
- durability and tear strength. For general mouldmaking where a hard rigid structure is required. (1)
- fast reproduction models and prototypes. (1)
- figurines (1)
- figurines. (2)
- fixtures (1)
- For casting and backfilling. Good edge stability. (1)
- Foundry patterns (2)
- gas and seawater resistance is required. (1)
- gauges (1)
- Good release properties (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (2)
- jigs (1)
- large negatives (1)
- Low series injection moulding tools. (1)
- Low to medium pressure RIM where high strength is required (1)
- Low to medium pressure RIM where high strength is required. (2)
- Low to medium pressure RIM where high thermal properties are required. Under bonnet (1)
- Low viscosity for detail. Pattern and modelmaking. (1)
- Master Patterns (1)
- model making (2)
- models (3)
- Moulding of complicated products with precise dimensions. Repetitive casting applications for ceramics (2)
- negatives (3)
- negatives & electroforming models. (2)
- negatives and fast reproduction models. Especially good in thin sections. (1)
- pattern making. (1)
- Patterns (3)
- Pre- fabricated frames (1)
- Pre- fabricated support frames and vacuum forming moulds. (1)
- Produces ultra fine detail and dimensional stability. (1)
- Prototypes (4)
- prototypes and bulk casting. (1)
- PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
- Reproduction models (1)
- Specifically for offshore uses where oil (1)
- Specifically formulated for vacuum forming Polycarbonate. (1)
- two component addition cure silicone rubber with facility to alter the shore A hardness by the use of different catalysts. There is also a blue catalyst. (1)
- vacuum casting machines and general mouldmaking. (2)
- vacuum forming tools. (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
-
- 10-12 (1)
- 100 (1)
- 100-140 (1)
- 12-16 (1)
- 120 (4)
- 120-180 (2)
- 13-17 (2)
- 140-160 (1)
- 140-160s (2)
- 15 (1)
- 15-20 (3)
- 150-210 (1)
- 16-20 (2)
- 160-220 (2)
- 18-24 (1)
- 180-240 (1)
- 1min30 - 1min50 (1)
- 1min45 - 2min15 (1)
- 2-3 (1)
- 2-3 hours (1)
- 20 (1)
- 20-25 (1)
- 22-28 (1)
- 23-27 (2)
- 25-30 (2)
- 25-35 (2)
- 2min15 - 2min45 (2)
- 3-4 (3)
- 3-5 (1)
- 3.5-4.5 (2)
- 30-40 (2)
- 30-45 (1)
- 30-45sec (1)
- 30-50 (3)
- 30-60 (1)
- 300-360 (1)
- 35-40 (1)
- 35-45 (1)
- 3min30 - 4min30 (1)
- 3min45 - 4min30 (1)
- 4-4.5 (1)
- 4-5 (3)
- 4-6 (2)
- 4.5-5.5 (2)
- 4.5-6.5 (2)
- 40 (2)
- 40-60sec (1)
- 40-70 (2)
- 45-60 (1)
- 45-60sec (1)
- 5-6 (2)
- 5.5-7.5 (1)
- 50-60 (1)
- 50-60sec (4)
- 50-70 (3)
- 50-80 (1)
- 55-65 sec (3)
- 5min30 - 7min (1)
- 6-8 (2)
- 6-9 (1)
- 6.5-7.5 (1)
- 6.5-8.5 (1)
- 60 (5)
- 60-70 (2)
- 60-80 (1)
- 7-10 (1)
- 7-12 (1)
- 7-8 (1)
- 7-9 (2)
- 70-80sec (1)
- 70-90sec (1)
- 8-10 (3)
- 8-11 (1)
- 8-12 (1)
- 80 (1)
- 80-100sec (1)
- 80-130 (1)
- 80-140 (1)
- 85-90 (1)
- 9-11 (3)
- 9-14 (1)
- 90-130 (1)
- 95-115sec (1)
- > 30 (1)
- >8 hours (2)
- data (8)
- n/a (53)
- see data (2)
- See TDS (17)
- Variable (1)
- Cure Time (25°C) Hours
-
- 0.5-1 (1)
- 1 (5)
- 1-2 (4)
- 10-15 mins (1)
- 10-25 mins (2)
- 12 (7)
- 12-15 mins (1)
- 12-16 (3)
- 12-18 (1)
- 12-24 (4)
- 15 mins (3)
- 15-20 mins (1)
- 15-25 mins (2)
- 15-30 mins (1)
- 15-40 mins (2)
- 16 (1)
- 16-24 (1)
- 18-24 (1)
- 2-4 (2)
- 20 (1)
- 20 - 30 mins (1)
- 20 mins (2)
- 20-25 mins (2)
- 20-25 mins (1)
- 20-30 (1)
- 20-40 mins (1)
- 20m (2)
- 24 (27)
- 24-48 (1)
- 24h (2)
- 25-30m (2)
- 25-35m (1)
- 25m (1)
- 3-4 (1)
- 3-60s (1)
- 30-40 mins (2)
- 30-50 mins (1)
- 30m (1)
- 4 (1)
- 4-8h (1)
- 45 (1)
- 45-55 mins (1)
- 45-60 mins (15)
- 48 (4)
- 5-30 sec (1)
- 5-60 sec (4)
- 50-60 mins (1)
- 50-70 mins (1)
- 6-12 (1)
- 6-8 (2)
- 60 mins (1)
- 60-90 mins (2)
- 60-90 mins (1)
- 8 (1)
- 8-12 (1)
- 8-14 (3)
- 90-120 mins (1)
- data (8)
- n/a (46)
- see data (2)
- See TDS (15)
- TBC (1)
- variable (1)
- Viscosity (25°C) mPa.s
-
- 1.3k-1.4k (1)
- 100-300 (1)
- 100-350 (5)
- 1000-1500 (1)
- 10000-15000 (1)
- 10000-16000 (1)
- 100k (1)
- 1100-1500 (2)
- 120-160 (1)
- 120-220 (1)
- 12000-16000 (2)
- 12000-18000 (1)
- 140-190 (1)
- 1400-1700 (1)
- 1400-2000 (1)
- 140k (1)
- 150-250 (2)
- 1500 (4)
- 1700-2200 (1)
- 180-300 (1)
- 1800-2800 (1)
- 2-10 (1)
- 20-40 (1)
- 200-400 (1)
- 2000 (1)
- 2000-3000 (1)
- 20000-26000 (1)
- 2200-2600 (1)
- 22000-32000 (1)
- 2400-2800 (1)
- 250-350 (2)
- 250-450 (2)
- 25000-30000 (2)
- 260-340 (3)
- 280-380 (1)
- 300-500 (3)
- 300-600 (4)
- 3000-8000 (1)
- 30000-50000 (1)
- 30k-70k (2)
- 350-550 (1)
- 350-650 (2)
- 400-600 (1)
- 400-700 (1)
- 400-800 (2)
- 40000-60000 (1)
- 45-85 (1)
- 450-550 (1)
- 450-650 (4)
- 450-900 (1)
- 4500-7500 (1)
- 50-100 (1)
- 500-1000 (3)
- 500-1200 (1)
- 500-800 (2)
- 5000-10000 (1)
- 5000-5500 (1)
- 520 (1)
- 550-750 (1)
- 60-100 (2)
- 60-120 (1)
- 600-1000 (1)
- 600-800 (5)
- 600-850 (1)
- 600-900 (8)
- 70-90 (3)
- 700-1000 (1)
- 700-1100 (1)
- 700-800 (1)
- 700-900 (1)
- 7000-20000 (1)
- 7000-9000 (1)
- 750-900 (1)
- 80 (2)
- 80-100 (1)
- 80-120 (2)
- 80-140 (1)
- 900-1000 (1)
- 900-1300 (1)
- 900-1500 (2)
- data (8)
- liquid (2)
- n/a (45)
- Paste (6)
- Putty (1)
- See TDS (11)
- TBC (5)
- thixo (7)
- Viscous (1)
- HDT °C
-
- 100 (5)
- 103-109 (1)
- 105 (1)
- 108 (1)
- 108-112 (1)
- 110 (3)
- 110-115 (1)
- 110-120 (2)
- 116 (1)
- 116-122 (1)
- 120 (2)
- 123-128 (1)
- 125 (2)
- 130 (4)
- 130-140 (1)
- 133-139 (1)
- 135 (1)
- 137-142 (1)
- 140 (1)
- 150-160 (3)
- 160 (1)
- 170 (2)
- 180-190 (2)
- 200 (1)
- 250 (1)
- 44-48 (1)
- 50 (2)
- 50-60 (2)
- 53-58 (1)
- 55 (4)
- 56-60 (1)
- 57-61 (1)
- 57-62 (1)
- 59 (1)
- 60 (5)
- 60-65 (6)
- 62-67 (1)
- 63-67 (1)
- 65 (1)
- 65-70 (4)
- 65-75 (1)
- 67-72 (1)
- 68 (2)
- 68-72 (4)
- 69-73 (1)
- 70 (1)
- 70-74 (2)
- 70-75 (2)
- 70-80 (1)
- 73 (1)
- 75 (2)
- 75-85 (1)
- 76-80 (1)
- 77-82 (1)
- 79-83 (1)
- 80 (7)
- 82-86 (2)
- 82-87 (2)
- 87-92 (1)
- 88-92 (1)
- 90 (2)
- 90-100 (1)
- 90-95 (3)
- 95 (1)
- 95-100 (1)
- data (4)
- n/a (66)
- See TDS (13)
- TBC (3)
- Shore Hardness
-
- 10D (1)
- 23-27A (1)
- 23D (1)
- 30-35 (1)
- 35-45A (1)
- 36-45A (1)
- 36A (1)
- 38-42A (1)
- 40-45 (1)
- 40-45A (1)
- 40A (1)
- 40D (1)
- 44D (1)
- 48-52 (1)
- 49D (1)
- 50-55D (1)
- 50D (1)
- 54D (1)
- 55-60A (1)
- 55-65A (1)
- 57-63A (1)
- 60-64D (1)
- 60-65 (1)
- 60A (1)
- 60D (1)
- 63-67D (1)
- 63-68A (1)
- 63D (1)
- 65-70A (2)
- 65-70D (3)
- 66 (1)
- 68-72A (1)
- 68-73D (1)
- 70-75 (1)
- 70-75D (7)
- 70-80D (2)
- 70D (2)
- 72D (1)
- 73D (1)
- 74D (1)
- 75-80D (15)
- 75D (2)
- 76D (1)
- 77-82D (1)
- 78-80D (1)
- 78-82D (3)
- 78-83 (1)
- 80-82D (1)
- 80-84D (3)
- 80-85 (2)
- 80-85D (10)
- 80-90A (2)
- 80-90D (1)
- 80A (1)
- 80D (8)
- 81D (1)
- 82-86D (1)
- 82-87D (4)
- 82D (2)
- 83-87 (2)
- 83-87D (4)
- 83-88D (3)
- 83D (1)
- 85-88D (1)
- 85-89 (1)
- 85-90D (16)
- 85D (4)
- 86-88D (1)
- 86-90 (1)
- 87-92 (1)
- 87-92A (1)
- 87-92D (4)
- 88-92 (2)
- 88-93D (2)
- 90-95D (3)
- 90-98A (1)
- 93-97 (1)
- 95D (1)
- data (8)
- n/a (37)
- See TDS (5)
- TBC (2)
- variable (1)
Recently Viewed Products