R.T.M. Tools

Items 1 to 10 of 11 total

per page

Page:
  1. 1
  2. 2
  • EP 401

    ALCHEMIX GELCOAT EP 401 is a two component, iron filled, brushable, room temperature curing surface coat. GELCOAT EP 401 is designed for use in polyurethane foam moulds, resin injection moulds, foundry patterns and vacuum forming tools. Learn More
  • EP 4062

    GELCOAT EP 4062 is a two component, aluminium filled, brushable, room temperature curing surface coat. GELCOAT EP 4062 is designed for use in RTM tools, RIM tools, PU moulding tools, vacuum forming moulds, negatives, applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. Learn More
  • EP 4062C

    ALCHEMIX EP 4062C is a two component, thixotropic epoxy resin system for use with GELCOAT EP 4062 and ALCHEMIX EP 4350 laminating paste.  ALCHEMIX EP 4062C is specifically formulated for high temperature applications. Learn More
  • EP 4350

    ALCHEMIX EP 4350 is a glass fibre reinforced epoxy laminating paste for use as a back filling compound in combination with GELCOAT EP 4062 and ALCHEMIX EP 4062C coupling coat. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. ALCHEMIX EP 4350 is formulated for use in RIM tools, moulds for pre-pregs and applications requiring high heat resistance. Learn More
  • EP 4352

    ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated.   After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More
  • EP 574

    ALCHEMIX EP 574 / H574 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. Learn More
  • EP 5752 - H5752HT

    ALCHEMIX EP 5752 - H5752HT is an epoxy laminating resin exhibiting high temperature resistance and excellent mechanical properties. ALCHEMIX EP 5752 - H5752HT is ideal for resin infusion, resin transfer moulding (RTM), filament winding, pultrusion and wet lay up applications. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part.   Learn More
  • EP 5752 Laminating System Data

    ALCHEMIX EP 5752 is an ambient cure epoxy resins system, available with a variety of hardeners for specific applications. Full product properties can be found on the appropriate technical data sheets. Learn More
  • EP 5753 - H5753HT

    ALCHEMIX EP 5753 – H5753HT is an epoxy laminating resin exhibiting high temperature resistance and excellent mechanical properties. ALCHEMIX EP 5753 – H5753HT is ideal for resin infusion, resin transfer moulding (RTM), filament winding, pultrusion and wet lay up applications. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part.   Learn More
  • EP 5753 Laminating System Data

    ALCHEMIX EP 5753 is an ambient cure epoxy resins system, available with a variety of hardeners for specific applications. Full product properties can be found on the appropriate technical data sheets. Learn More

Items 1 to 10 of 11 total

per page

Page:
  1. 1
  2. 2