Vacuumforming and Thermoforming

Items 1 to 10 of 23 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • A 83

    ALCHEMIX A83 is an aluminium powder that can be added to specific resins to alter the properties. Learn More
  • A 84

    ALCHEMIX A84 is a matallic filler consisting of Aluminium granules which can be added to specific resins to alter the properties. Learn More
  • A 85

    ALCHEMIX A85 is a mineral filler consisting of Silica sand, which can be added to specific resins to alter the properties. Learn More
  • EP 401

    ALCHEMIX GELCOAT EP 401 is a two component, iron filled, brushable, room temperature curing surface coat. GELCOAT EP 401 is designed for use in polyurethane foam moulds, resin injection moulds, foundry patterns and vacuum forming tools. Learn More
  • EP 4062

    GELCOAT EP 4062 is a two component, aluminium filled, brushable, room temperature curing surface coat. GELCOAT EP 4062 is designed for use in RTM tools, RIM tools, PU moulding tools, vacuum forming moulds, negatives, applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. Learn More
  • EP 4062C

    ALCHEMIX EP 4062C is a two component, thixotropic epoxy resin system for use with GELCOAT EP 4062 and ALCHEMIX EP 4350 laminating paste.  ALCHEMIX EP 4062C is specifically formulated for high temperature applications. Learn More
  • EP 424

    ALCHEMIX EP 424 is an aluminium filled, two part epoxy casting system formulated for the construction of tools used in vacuum forming machines and the production of prototypes requiring detail and strength. ALCHEMIX EP 424 can also be used as a general purpose casting resin for situations where a high operating temperature is required. ALCHEMIX EP 424 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings Learn More
  • EP 425

    ALCHEMIX EP 425 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. ALCHEMIX EP 425 is formulated to have fast cure with minimal shrinkage, and is highly polishable. Heat stability up to of 160°C can be achieved with post curing. Learn More
  • EP 426

    ALCHEMIX EP 426 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools.   ALCHEMIX EP 426 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings. Learn More
  • EP 4350

    ALCHEMIX EP 4350 is a glass fibre reinforced epoxy laminating paste for use as a back filling compound in combination with GELCOAT EP 4062 and ALCHEMIX EP 4062C coupling coat. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. ALCHEMIX EP 4350 is formulated for use in RIM tools, moulds for pre-pregs and applications requiring high heat resistance. Learn More

Items 1 to 10 of 23 total

per page

Page:
  1. 1
  2. 2
  3. 3