Negatives and First Reproductions

Products that are specifically designed and formulated for Negatives and First Reproductions.

Items 1 to 10 of 15 total

per page

Page:
  1. 1
  2. 2
  • EP402B

    ALCHEMIX GELCOAT EP 402B is a two component, mineral filled, brushable, room temperature curing surface coat. Also available in White. Learn More
  • EP425

    ALCHEMIX EP 425 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. ALCHEMIX EP 425 is formulated to have fast cure with minimal shrinkage, and is highly polishable. Heat stability up to of 160°C can be achieved with post curing. Learn More
  • EP426

    ALCHEMIX EP 426 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools.   ALCHEMIX EP 426 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings. Learn More
  • M1001

    Model Board M 1001 is a board and block material with excellent physical properties, which makes it suitable for many different applications. Learn More
  • PU3426

    ALCHEMIX PU 3426 is a tough flexible polyurethane system of 57 - 63 Shore A, designed specifically for offshore applications requiring good tensile strength and chemical resistance. The system exhibits a rapid development of properties while retaining a relatively long useable life. Learn More
  • PU3604

    ALCHEMIX PU 3604 is an unfilled, no odour, low viscosity two component polyurethane system to which mineral and metallic fillers can be added at variable ratios depending on the application and the required thickness of the casting. ALCHEMIX PU 3604 has excellent physical properties, most notably excellent impact resistance. ALCHEMIX PU 3604 is available as a standard cure speed version (7 - 9 minute pot life) or as a fast cure speed version (2 - 3 minute pot life). The product is pigmented black, but is available in other colours on request. Learn More
  • PU364

    ALCHEMIX PU 364 is a two component, low odour, fastcast polyurethane system which is designed for thin sections or casting to 20mm thick. The material has a very quick demould time and is designed to be used unfilled. Learn More
  • PU3652

    ALCHEMIX PU 3652 is an unfilled two component polyurethane system, which has no odour and very low viscosity. Mineral and metallic fillers may be added to it in variable ratios depending on the casting thickness. This economical casting resin can be used to produce ultra-fine details in model making or as a low viscosity casting resin for pattern making. ALCHEMIX PU 3652 is recommended for use in open moulds. Learn More
  • PU3670

    ALCHEMIX PU 3670 is an unfilled, no odour, low viscosity two component polyurethane system to which mineral and metallic fillers can be added in either the suggested or variable ratios depending on the application and the required thickness of the casting. ALCHEMIX PU 3670 can be used to produce ultra-fine detail in model-making, or as a low viscosity casting resin for pattern-making. Learn More
  • PU3672

    ALCHEMIX PU 3672 is an unfilled, no odour, low viscosity two component fastcast polyurethane system to which specific dry fillers can be added in either the suggested or variable ratios depending on the application and the required thickness of the casting.  Can be used to produce ultra-fine detail in model-making, or as a low viscosity casting resin for pattern-making. Learn More

Items 1 to 10 of 15 total

per page

Page:
  1. 1
  2. 2