Industry

Categories for relevant industry sectors.

Items 1 to 10 of 13 total

per page

Page:
  1. 1
  2. 2
  • EP4093

    ALCHEMIX GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required. Learn More
  • EP4385

    Two-part iron reinforced slump resistant epoxy repair system. Learn More
  • EP4517

    ALCHEMIX EP 4517 / H4517 is a two part, ambient temperature cure, liquid epoxy system; exhibiting outstanding thermal dissipation and electrical characteristics. This system has remarkably low mixed viscosity and when cured shows good electrical properties even at elevated temperatures. Learn More
  • EP4905

    ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage.  The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More
  • EP502

    ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More
  • EP504

    ALCHEMIX EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions. Learn More
  • EP519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More
  • EP519 / H50

    ALCHEMIX EP 519 / H50 is a general purpose laminating resin for laminates requiring good flexural strength. The low viscosity of ALCHEMIX EP 519 / H50 allows excellent wetting of fibres, such as carbon fibre. Learn More
  • VC3360

    ALCHEMIX VC 3360 is a high temperature, polyurethane vacuum casting resin designed to simulate thermoplastics such as Nylon and glass filled Nylon. ALCHEMIX VC 3360 has high flexural modulus, excellent physical properties and fast demould time. The system is specifically designed for use in gravity vacuum casting machines. A slow version, ALCHEMIX VC 3360S, is also available. Learn More
  • VC3360S

    ALCHEMIX VC 3360S is a high temperature, polyurethane vacuum casting resin designed to simulate thermoplastics such Nylon and glass filled Nylon. ALCHEMIX VC 3360S has high flexural modulus, excellent physical properties and fast demould time. The system is specifically designed for use in gravity vacuum casting machines. A fast version, ALCHEMIX VC 3360, is also available. Learn More

Items 1 to 10 of 13 total

per page

Page:
  1. 1
  2. 2