- Home /
- Applications
Applications
Categories for relevant areas of Application.
-
8014
Alchemix Cleaning Fluid 8014 is a powerful cleaning and flushing agent for two-component application equipment. Whilst efficiently removing unreacted material from the equipment, 8014 also acts to lubricate seals, preventing them from drying out. It is also effective at dissolving and purging crystallised isocyanate from old hoses or joints. Learn More -
8401
ALCHEMIX 8401 is a superfast Cyanoacrylate adhesive of medium viscosity. It is designed for the bonding of materials that have relatively inactive surfaces. Learn More -
8406
ALCHEMIX 8406 is a superfast Cyanoacrylate adhesive of low viscosity. It is designed for the bonding of materials that have relatively inactive surfaces and is excellent for the bonding of elastomers and rubbers with excellent humidity resistance. Learn More -
8416
ALCHEMIX 8416 is an ethyl Cyanoacrylate adhesive of high viscosity. It is especially suitable for bonding irregular or porous components with excellent gap filling properties. Learn More -
8420
ALCHEMIX 8420 Adhesive is a single component Cyanoacrylate adhesive of very low viscosity. It is designed for the bonding of materials that have relatively inactive surfaces and is excellent for the bonding of elastomers and rubbers with excellent humidity resistance. ALCHEMIX 8420 Adhesive can be used for bonding rubber and metal components, fabric to metal and seals & O rings. Learn More -
8454
8454 Adhesive is a faster curing, very high viscosity Ethyl Cyanoacrylate based adhesive. The new formulation shows greater surface insensitivity thus allowing faster bonding of all substrates and improved performance on wood, card and metals. The new gel formulation exhibits improved thixotropic behaviour and uniform appearance. Learn More -
8460
ALCHEMIX 8460 is a low odour, low bloom instant adhesive of medium viscosity that requires less ventilation than that normally needed for cyanoacrylate adhesives. It offers excellent adhesion to most materials and is of Medium viscosity.< Learn More -
8479
ALCHEMIX 8479 is an activator spray for speeding up the reaction time of our Cyanoacrylate adhesives. Learn More -
8806
ALCHEMIX 8806 is a non reactive silicone oil used for viscosity and hardness adjustment of RTV silicone rubbers. Learn More -
8997
ALCHEMIX Polymer Cleaner 8997 is a cleaning solution for use on a number of polymeric compounds including polyurethane and epoxy. It replaces traditional hazardous chemicals used for cleaning polymeric components, reducing the safety risk to the user and the environment. Learn More
Categories
- Air Filters
- Back Filling
- Badge Doming
- Bonding
- Carbon Prepreg Tooling
- Cases for Ceramics
- Checking Fixtures
- Clear Casting
- CNC Milling
- Composites
- Concrete Moulding
- Cosmetic Carbon Fibre
- Electrical Encapsulation
- Electrical Potting
- Embedding
- Face Casting - Concrete
- Fibrous Plastering
- Foundry Patterns & Core Boxes
- Hammer Form Tools
- Hand Lay Up / Laminating
- Jigs & Fixtures
- Low Series Production
- Mannequins
- Master Patterns
- Model Making
- Mould Making
- Negatives and First Reproductions
- Offshore and Undersea
- Pad Printing
- Penny Flooring
- Plastic Injection Mould Tools
- R.I.M Component Parts
- R.I.M. Tooling
- R.T.M. Tools
- Resin Casting
- Resin Infusion
- River Tables
- Rotacasting
- Sanitaryware Moulds
- Sheetmetal Forming
- Spin Casting
- Styling Models
- Vacuum Casting
- Vacuumforming and Thermoforming
Filter
- Industry
- Application
-
- A translucent (1)
- Adhesive for Epoxy and Polyurethane modelboard. (1)
- Adhesive for M1300 (1)
- Adhesive for M301 (1)
- Adhesive for M651 (1)
- Back filling for foundry patterns (1)
- Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
- copy models (2)
- durability and tear strength. For general mouldmaking where a hard rigid structure is required. (1)
- fast reproduction models and prototypes. (3)
- figurines (3)
- figurines. (4)
- fixtures (3)
- For casting and backfilling. Good edge stability. (1)
- Foundry patterns (2)
- gas and seawater resistance is required. (1)
- gauges (1)
- General mouldmaking for producing replicas in polyester (2)
- Good release properties (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (2)
- jigs (1)
- Jigs & Fixtures (2)
- large negatives (1)
- Low to medium pressure RIM where high strength is required (1)
- Low to medium pressure RIM where high strength is required. (2)
- Low to medium pressure RIM where high thermal properties are required. Under bonnet (1)
- Low viscosity for detail. Pattern and modelmaking. (1)
- Master Patterns (3)
- model making (4)
- models (5)
- Moulding of complicated products with precise dimensions. Repetitive casting applications for ceramics (2)
- negatives (3)
- negatives & electroforming models. (2)
- negatives and fast reproduction models. Especially good in thin sections. (1)
- pattern making. (2)
- Patterns (3)
- Pre- fabricated frames (1)
- Pre- fabricated support frames and vacuum forming moulds. (1)
- Produces ultra fine detail and dimensional stability. (1)
- Prototypes (6)
- prototypes and bulk casting. (1)
- PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
- Reproduction models (1)
- Specifically for offshore uses where oil (1)
- Specifically formulated for vacuum forming Polycarbonate. (1)
- two component addition cure silicone rubber with facility to alter the shore A hardness by the use of different catalysts. There is also a blue catalyst. (1)
- vacuum casting machines and general mouldmaking. (2)
- vacuum forming tools. (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
-
- 10-12 (1)
- 100 (1)
- 100-140 (1)
- 12-16 (1)
- 120 (4)
- 120-180 (2)
- 13-17 (2)
- 140-160 (1)
- 140-160s (2)
- 15 (1)
- 15-20 (3)
- 16-20 (1)
- 160-220 (2)
- 18-24 (1)
- 180-240 (1)
- 1min30 - 1min50 (1)
- 1min45 - 2min15 (1)
- 2-3 (1)
- 2-3 hours (1)
- 20 (1)
- 20-25 (1)
- 22-28 (1)
- 23-27 (2)
- 25-30 (2)
- 25-35 (2)
- 2min15 - 2min45 (2)
- 3-4 (3)
- 3-5 (1)
- 3.5-4.5 (2)
- 30-40 (2)
- 30-45 (1)
- 30-45sec (1)
- 30-50 (3)
- 30-60 (1)
- 300-360 (1)
- 35-40 (1)
- 35-45 (1)
- 3min30 - 4min30 (1)
- 3min45 - 4min30 (1)
- 4-4.5 (1)
- 4-5 (3)
- 4-6 (2)
- 4.5-5.5 (2)
- 4.5-6.5 (2)
- 40 (2)
- 40-60sec (1)
- 40-70 (2)
- 45-60 (1)
- 45-60sec (1)
- 5-6 (2)
- 5-7 (1)
- 5.5-7.5 (2)
- 50-60 (1)
- 50-60sec (4)
- 50-70 (3)
- 50-80 (1)
- 55-65 sec (3)
- 5min30 - 7min (1)
- 6-8 (2)
- 6-9 (1)
- 6.5-7.5 (1)
- 6.5-8.5 (1)
- 60 (5)
- 60-70 (2)
- 60-80 (1)
- 7-10 (1)
- 7-12 (1)
- 7-8 (1)
- 7-9 (2)
- 70-80sec (1)
- 70-90sec (1)
- 8-10 (3)
- 8-11 (1)
- 8-12 (1)
- 80 (1)
- 80-100sec (1)
- 80-130 (1)
- 80-140 (1)
- 85-90 (1)
- 9-11 (3)
- 9-14 (1)
- 90-130 (1)
- 95-115sec (1)
- > 30 (1)
- >8 hours (2)
- data (8)
- n/a (53)
- see data (2)
- See TDS (17)
- Variable (1)
- Cure Time (25°C) Hours
-
- 0.5-1 (1)
- 1 (5)
- 1-2 (4)
- 10-15 mins (1)
- 10-25 mins (2)
- 12 (7)
- 12-15 mins (1)
- 12-16 (3)
- 12-18 (1)
- 12-24 (4)
- 15 mins (3)
- 15-20 mins (1)
- 15-25 mins (2)
- 15-30 mins (1)
- 15-40 mins (2)
- 16-24 (1)
- 18-24 (1)
- 2-4 (2)
- 20 (1)
- 20 - 30 mins (1)
- 20 mins (2)
- 20-25 mins (1)
- 20-25 mins (2)
- 20-30 (1)
- 20-40 mins (1)
- 20m (2)
- 24 (27)
- 24-48 (1)
- 24h (2)
- 25-30m (2)
- 25-35m (1)
- 25m (1)
- 3-4 (1)
- 3-60s (1)
- 30-40 mins (3)
- 30-50 mins (1)
- 30m (1)
- 4 (1)
- 45 (1)
- 45-55 mins (1)
- 45-60 mins (15)
- 48 (4)
- 5-30 sec (1)
- 5-60 sec (4)
- 50-60 mins (1)
- 50-70 mins (1)
- 6-12 (1)
- 6-8 (2)
- 60 mins (2)
- 60-90 mins (2)
- 60-90 mins (1)
- 8 (1)
- 8-12 (1)
- 8-14 (3)
- 90-120 mins (1)
- data (8)
- n/a (46)
- see data (2)
- See TDS (15)
- TBC (1)
- variable (1)
- Viscosity (25°C) mPa.s
-
- 1.3k-1.4k (1)
- 100-260 (1)
- 100-300 (1)
- 100-350 (5)
- 1000-1500 (1)
- 10000-15000 (1)
- 10000-16000 (1)
- 100k (1)
- 1100-1500 (2)
- 120-160 (1)
- 120-220 (1)
- 12000-16000 (2)
- 12000-18000 (1)
- 140-190 (1)
- 1400-1700 (1)
- 1400-2000 (1)
- 140k (1)
- 150-250 (2)
- 1500 (3)
- 1700-2200 (1)
- 180-300 (1)
- 1800-2800 (1)
- 2-10 (1)
- 20-40 (1)
- 200-400 (1)
- 2000 (1)
- 2000-3000 (1)
- 20000-26000 (1)
- 2200-2600 (1)
- 22000-32000 (1)
- 2400-2800 (1)
- 250-350 (2)
- 250-450 (3)
- 25000-30000 (2)
- 260-340 (3)
- 280-380 (1)
- 300-500 (3)
- 300-600 (4)
- 3000-8000 (1)
- 30k-70k (2)
- 350-550 (1)
- 350-650 (2)
- 400-600 (1)
- 400-700 (1)
- 400-800 (2)
- 40000-60000 (1)
- 45-85 (1)
- 450-550 (1)
- 450-650 (4)
- 450-900 (1)
- 4500-7500 (1)
- 50-100 (1)
- 500-1000 (3)
- 500-1200 (1)
- 500-800 (2)
- 5000-10000 (1)
- 5000-5500 (1)
- 520 (1)
- 550-750 (1)
- 60-100 (2)
- 60-120 (1)
- 600-1000 (1)
- 600-800 (5)
- 600-850 (1)
- 600-900 (8)
- 70-90 (3)
- 700-1000 (1)
- 700-1100 (1)
- 700-800 (1)
- 700-900 (1)
- 7000-20000 (1)
- 7000-9000 (1)
- 750-900 (1)
- 80 (2)
- 80-100 (1)
- 80-120 (2)
- 80-140 (1)
- 900-1000 (1)
- 900-1300 (1)
- 900-1500 (2)
- data (8)
- liquid (2)
- n/a (45)
- Paste (6)
- Putty (1)
- See TDS (11)
- TBC (5)
- thixo (7)
- Viscous (1)
- HDT °C
-
- 100 (5)
- 103-109 (1)
- 105 (1)
- 108 (1)
- 108-112 (1)
- 110 (3)
- 110-115 (1)
- 110-120 (2)
- 116 (1)
- 116-122 (1)
- 120 (2)
- 123-128 (1)
- 125 (2)
- 130 (4)
- 130-140 (1)
- 133-139 (1)
- 135 (1)
- 137-142 (1)
- 140 (1)
- 150-160 (3)
- 160 (1)
- 170 (2)
- 180-190 (2)
- 200 (1)
- 44-48 (1)
- 50 (2)
- 50-60 (2)
- 53-58 (1)
- 55 (2)
- 56-60 (1)
- 57-61 (1)
- 57-62 (1)
- 60 (5)
- 60-65 (6)
- 62-67 (1)
- 63-67 (1)
- 65 (1)
- 65-70 (4)
- 65-75 (1)
- 67-72 (1)
- 68 (2)
- 68-72 (4)
- 69-73 (1)
- 70 (1)
- 70-74 (2)
- 70-75 (2)
- 70-80 (1)
- 73 (1)
- 75 (2)
- 75-85 (1)
- 76-80 (1)
- 77-82 (1)
- 79-83 (1)
- 80 (7)
- 82-86 (2)
- 82-87 (2)
- 87-92 (1)
- 88-92 (1)
- 90 (2)
- 90-95 (3)
- 95 (1)
- 95-100 (1)
- data (4)
- n/a (67)
- See TDS (15)
- TBC (3)
- Shore Hardness
-
- 10D (1)
- 23-27A (1)
- 23D (1)
- 30-35 (1)
- 35-45A (1)
- 36-45A (1)
- 36A (1)
- 38-42A (1)
- 40-45 (1)
- 40-45A (1)
- 40A (1)
- 40D (1)
- 48-52 (1)
- 49D (1)
- 50-55D (1)
- 50D (1)
- 55-60A (1)
- 55-65A (1)
- 57-63A (1)
- 60-64D (1)
- 60-65 (1)
- 60A (1)
- 60D (1)
- 63-67D (1)
- 63-68A (1)
- 63D (1)
- 65-70A (2)
- 65-70D (3)
- 68-72A (1)
- 68-73D (1)
- 70-75 (1)
- 70-75D (7)
- 70-80D (2)
- 70D (2)
- 72D (1)
- 73D (1)
- 74D (1)
- 75-80D (15)
- 75D (2)
- 76D (1)
- 77-82D (1)
- 78-82D (3)
- 78-83 (1)
- 80-82D (1)
- 80-84D (3)
- 80-85 (2)
- 80-85D (10)
- 80-90A (2)
- 80-90D (1)
- 80A (1)
- 80D (8)
- 81D (1)
- 82-86D (2)
- 82-87D (5)
- 82D (2)
- 83-87 (2)
- 83-87D (4)
- 83-88D (3)
- 83D (1)
- 85-88D (1)
- 85-89 (1)
- 85-90D (16)
- 85D (4)
- 86-88D (1)
- 86-90 (1)
- 87-92 (1)
- 87-92A (1)
- 87-92D (4)
- 88-92 (2)
- 88-93D (2)
- 90-95D (2)
- 90-98A (1)
- 93-97 (1)
- 95D (1)
- data (8)
- n/a (38)
- See TDS (6)
- TBC (2)
- variable (1)
Recently Viewed Products