- Home /
- Industry
Industry
Categories for relevant industry sectors.
-
A81
ALCHEMIX A81 is a mineral filler consisting of Slate powder which can be added to specific resins to alter the properties. Learn More -
A82
ALCHEMIX A82 is a mineral filler consisting of slate granules which can be added to specific resins to alter the properties. Learn More -
A83
ALCHEMIX A83 is an aluminium powder that can be added to specific resins to alter the properties. Learn More -
A84
ALCHEMIX A84 is a metallic filler consisting of Aluminium granules which can be added to specific resins to alter the properties. Learn More -
A85
ALCHEMIX A85 is a mineral filler consisting of Silica sand, which can be added to specific resins to alter the properties. Learn More -
A86
ALCHEMIX A86 is a mineral filler consisting of Silica flour which can be added to specific resins to alter the properties. Learn More -
A87
ALCHEMIX A87 Fillite is a glass hard, inert, hollow silicate sphere. It is primarily used to reduce the weight of plastics, rubber, resin and cement etc. It also imparts further benefits in many situations. Due to spherical nature of the particles, increased filler loading and improved rheology can be obtained while using A87 Fillite. Learn More -
A89
ALCHEMIX A89 is an untreated fumed silica. It is a synthetic, amorphous, colloidal silicon dioxide that is generally regarded as unique because of it's unusual particle characteristics. A89's extremely small particle size, it's enormous surface area, it's high purity, and it's chain-forming tendencies set it apart in a class of it's own. A89 is a light, fluffy powder that is white in appearance and is used in many applications and in a variety of industries. Learn More -
A91
ALCHEMIX A91 is a Aluminium trihydroxide filler powder which is generally used with our fast cast resin products to alter the properties and bulk the material out. Learn More -
AC8710
ALCHEMIX AC 8710 is an aqueous dispersion of acrylic polymers, primarily used as a binder for Gypsum based plasters in sculptures industry. It gives excellent strength to the plaster and reduces the fragility that is inherent to plasters. Alchemix AC8710 is white in colour therefore does not affect the base colour of the plaster and can easily be pigmented. The product works perfect even at temperatures as low as near 0°C, however the cure time increases at lower temperatures. Learn More
Categories
Filter
- Industry
- Application
-
- A translucent (1)
- Adhesive for Epoxy and Polyurethane modelboard. (1)
- Adhesive for M1300 (1)
- Adhesive for M301 (1)
- Adhesive for M651 (1)
- Back filling for foundry patterns (1)
- Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
- copy models (2)
- durability and tear strength. For general mouldmaking where a hard rigid structure is required. (1)
- fast reproduction models and prototypes. (1)
- figurines (1)
- figurines. (2)
- fixtures (1)
- For casting and backfilling. Good edge stability. (1)
- Foundry patterns (2)
- gas and seawater resistance is required. (1)
- gauges (1)
- Good release properties (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (2)
- jigs (1)
- large negatives (1)
- Low series injection moulding tools. (1)
- Low to medium pressure RIM where high strength is required (1)
- Low to medium pressure RIM where high strength is required. (2)
- Low to medium pressure RIM where high thermal properties are required. Under bonnet (1)
- Low viscosity for detail. Pattern and modelmaking. (1)
- Master Patterns (1)
- model making (2)
- models (3)
- Moulding of complicated products with precise dimensions. Repetitive casting applications for ceramics (2)
- negatives (3)
- negatives & electroforming models. (2)
- negatives and fast reproduction models. Especially good in thin sections. (1)
- pattern making. (1)
- Patterns (3)
- Pre- fabricated frames (1)
- Pre- fabricated support frames and vacuum forming moulds. (1)
- Produces ultra fine detail and dimensional stability. (1)
- Prototypes (4)
- prototypes and bulk casting. (1)
- PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
- Reproduction models (1)
- Specifically for offshore uses where oil (1)
- Specifically formulated for vacuum forming Polycarbonate. (1)
- two component addition cure silicone rubber with facility to alter the shore A hardness by the use of different catalysts. There is also a blue catalyst. (1)
- vacuum casting machines and general mouldmaking. (2)
- vacuum forming tools. (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
-
- 10-12 (1)
- 100 (1)
- 100-140 (1)
- 12-16 (1)
- 120 (4)
- 120-180 (2)
- 13-17 (2)
- 140-160 (1)
- 140-160s (2)
- 15 (1)
- 15-20 (3)
- 150-210 (1)
- 16-20 (2)
- 160-220 (2)
- 18-24 (1)
- 180-240 (1)
- 1min30 - 1min50 (1)
- 1min45 - 2min15 (1)
- 2-3 (1)
- 2-3 hours (1)
- 20 (1)
- 20-25 (1)
- 22-28 (1)
- 23-27 (2)
- 25-30 (2)
- 25-35 (2)
- 2min15 - 2min45 (2)
- 3-4 (3)
- 3-5 (1)
- 3.5-4.5 (2)
- 30-40 (2)
- 30-45 (1)
- 30-45sec (1)
- 30-50 (3)
- 30-60 (1)
- 300-360 (1)
- 35-40 (1)
- 35-45 (1)
- 3min30 - 4min30 (1)
- 3min45 - 4min30 (1)
- 4-4.5 (1)
- 4-5 (3)
- 4-6 (2)
- 4.5-5.5 (2)
- 4.5-6.5 (2)
- 40 (2)
- 40-60sec (1)
- 40-70 (2)
- 45-60 (1)
- 45-60sec (1)
- 5-6 (2)
- 5.5-7.5 (1)
- 50-60 (1)
- 50-60sec (4)
- 50-70 (3)
- 50-80 (1)
- 55-65 sec (3)
- 5min30 - 7min (1)
- 6-8 (2)
- 6-9 (1)
- 6.5-7.5 (1)
- 6.5-8.5 (1)
- 60 (5)
- 60-70 (2)
- 60-80 (1)
- 7-10 (1)
- 7-12 (1)
- 7-8 (1)
- 7-9 (2)
- 70-80sec (1)
- 70-90sec (1)
- 8-10 (3)
- 8-11 (1)
- 8-12 (1)
- 80 (1)
- 80-100sec (1)
- 80-130 (1)
- 80-140 (1)
- 85-90 (1)
- 9-11 (3)
- 9-14 (1)
- 90-130 (1)
- 95-115sec (1)
- > 30 (1)
- >8 hours (2)
- data (8)
- n/a (53)
- see data (2)
- See TDS (17)
- Variable (1)
- Cure Time (25°C) Hours
-
- 0.5-1 (1)
- 1 (5)
- 1-2 (4)
- 10-15 mins (1)
- 10-25 mins (2)
- 12 (7)
- 12-15 mins (1)
- 12-16 (3)
- 12-18 (1)
- 12-24 (4)
- 15 mins (3)
- 15-20 mins (1)
- 15-25 mins (2)
- 15-30 mins (1)
- 15-40 mins (2)
- 16 (1)
- 16-24 (1)
- 18-24 (1)
- 2-4 (2)
- 20 (1)
- 20 - 30 mins (1)
- 20 mins (2)
- 20-25 mins (2)
- 20-25 mins (1)
- 20-30 (1)
- 20-40 mins (1)
- 20m (2)
- 24 (27)
- 24-48 (1)
- 24h (2)
- 25-30m (2)
- 25-35m (1)
- 25m (1)
- 3-4 (1)
- 3-60s (1)
- 30-40 mins (2)
- 30-50 mins (1)
- 30m (1)
- 4 (1)
- 4-8h (1)
- 45 (1)
- 45-55 mins (1)
- 45-60 mins (15)
- 48 (4)
- 5-30 sec (1)
- 5-60 sec (4)
- 50-60 mins (1)
- 50-70 mins (1)
- 6-12 (1)
- 6-8 (2)
- 60 mins (1)
- 60-90 mins (2)
- 60-90 mins (1)
- 8 (1)
- 8-12 (1)
- 8-14 (3)
- 90-120 mins (1)
- data (8)
- n/a (46)
- see data (2)
- See TDS (15)
- TBC (1)
- variable (1)
- Viscosity (25°C) mPa.s
-
- 1.3k-1.4k (1)
- 100-300 (1)
- 100-350 (5)
- 1000-1500 (1)
- 10000-15000 (1)
- 10000-16000 (1)
- 100k (1)
- 1100-1500 (2)
- 120-160 (1)
- 120-220 (1)
- 12000-16000 (2)
- 12000-18000 (1)
- 140-190 (1)
- 1400-1700 (1)
- 1400-2000 (1)
- 140k (1)
- 150-250 (2)
- 1500 (4)
- 1700-2200 (1)
- 180-300 (1)
- 1800-2800 (1)
- 2-10 (1)
- 20-40 (1)
- 200-400 (1)
- 2000 (1)
- 2000-3000 (1)
- 20000-26000 (1)
- 2200-2600 (1)
- 22000-32000 (1)
- 2400-2800 (1)
- 250-350 (2)
- 250-450 (2)
- 25000-30000 (2)
- 260-340 (3)
- 280-380 (1)
- 300-500 (3)
- 300-600 (4)
- 3000-8000 (1)
- 30000-50000 (1)
- 30k-70k (2)
- 350-550 (1)
- 350-650 (2)
- 400-600 (1)
- 400-700 (1)
- 400-800 (2)
- 40000-60000 (1)
- 45-85 (1)
- 450-550 (1)
- 450-650 (4)
- 450-900 (1)
- 4500-7500 (1)
- 50-100 (1)
- 500-1000 (3)
- 500-1200 (1)
- 500-800 (2)
- 5000-10000 (1)
- 5000-5500 (1)
- 520 (1)
- 550-750 (1)
- 60-100 (2)
- 60-120 (1)
- 600-1000 (1)
- 600-800 (5)
- 600-850 (1)
- 600-900 (8)
- 70-90 (3)
- 700-1000 (1)
- 700-1100 (1)
- 700-800 (1)
- 700-900 (1)
- 7000-20000 (1)
- 7000-9000 (1)
- 750-900 (1)
- 80 (2)
- 80-100 (1)
- 80-120 (2)
- 80-140 (1)
- 900-1000 (1)
- 900-1300 (1)
- 900-1500 (2)
- data (8)
- liquid (2)
- n/a (45)
- Paste (6)
- Putty (1)
- See TDS (11)
- TBC (5)
- thixo (7)
- Viscous (1)
- HDT °C
-
- 100 (5)
- 103-109 (1)
- 105 (1)
- 108 (1)
- 108-112 (1)
- 110 (3)
- 110-115 (1)
- 110-120 (2)
- 116 (1)
- 116-122 (1)
- 120 (2)
- 123-128 (1)
- 125 (2)
- 130 (4)
- 130-140 (1)
- 133-139 (1)
- 135 (1)
- 137-142 (1)
- 140 (1)
- 150-160 (3)
- 160 (1)
- 170 (2)
- 180-190 (2)
- 200 (1)
- 250 (1)
- 44-48 (1)
- 50 (2)
- 50-60 (2)
- 53-58 (1)
- 55 (4)
- 56-60 (1)
- 57-61 (1)
- 57-62 (1)
- 59 (1)
- 60 (5)
- 60-65 (6)
- 62-67 (1)
- 63-67 (1)
- 65 (1)
- 65-70 (4)
- 65-75 (1)
- 67-72 (1)
- 68 (2)
- 68-72 (4)
- 69-73 (1)
- 70 (1)
- 70-74 (2)
- 70-75 (2)
- 70-80 (1)
- 73 (1)
- 75 (2)
- 75-85 (1)
- 76-80 (1)
- 77-82 (1)
- 79-83 (1)
- 80 (7)
- 82-86 (2)
- 82-87 (2)
- 87-92 (1)
- 88-92 (1)
- 90 (2)
- 90-100 (1)
- 90-95 (3)
- 95 (1)
- 95-100 (1)
- data (4)
- n/a (66)
- See TDS (13)
- TBC (3)
- Shore Hardness
-
- 10D (1)
- 23-27A (1)
- 23D (1)
- 30-35 (1)
- 35-45A (1)
- 36-45A (1)
- 36A (1)
- 38-42A (1)
- 40-45 (1)
- 40-45A (1)
- 40A (1)
- 40D (1)
- 44D (1)
- 48-52 (1)
- 49D (1)
- 50-55D (1)
- 50D (1)
- 54D (1)
- 55-60A (1)
- 55-65A (1)
- 57-63A (1)
- 60-64D (1)
- 60-65 (1)
- 60A (1)
- 60D (1)
- 63-67D (1)
- 63-68A (1)
- 63D (1)
- 65-70A (2)
- 65-70D (3)
- 66 (1)
- 68-72A (1)
- 68-73D (1)
- 70-75 (1)
- 70-75D (7)
- 70-80D (2)
- 70D (2)
- 72D (1)
- 73D (1)
- 74D (1)
- 75-80D (15)
- 75D (2)
- 76D (1)
- 77-82D (1)
- 78-80D (1)
- 78-82D (3)
- 78-83 (1)
- 80-82D (1)
- 80-84D (3)
- 80-85 (2)
- 80-85D (10)
- 80-90A (2)
- 80-90D (1)
- 80A (1)
- 80D (8)
- 81D (1)
- 82-86D (1)
- 82-87D (4)
- 82D (2)
- 83-87 (2)
- 83-87D (4)
- 83-88D (3)
- 83D (1)
- 85-88D (1)
- 85-89 (1)
- 85-90D (16)
- 85D (4)
- 86-88D (1)
- 86-90 (1)
- 87-92 (1)
- 87-92A (1)
- 87-92D (4)
- 88-92 (2)
- 88-93D (2)
- 90-95D (3)
- 90-98A (1)
- 93-97 (1)
- 95D (1)
- data (8)
- n/a (37)
- See TDS (5)
- TBC (2)
- variable (1)