Menu

Industry

Categories for relevant industry sectors.

Items 71 to 80 of 237 total

per page

Page:
  1. 6
  2. 7
  3. 8
  4. 9
  5. 10
  • EP4820 / H103

    EP4820 / H103

    ALCHEMIX EP 4820 is a low viscosity Epoxy resin system, that gives excellent chemical resistance especially against diesel fuel. It can be used at elevated temperatures and below freezing. Learn More

    View Details

  • EP4905

    EP4905

    ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage.  The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More

    View Details

  • EP502

    EP502

    ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More

    View Details

  • EP504

    EP504

    ALCHEMIX EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions. Learn More

    View Details

  • EP519

    EP519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More

    View Details

  • EP519 / H50

    EP519 / H50

    ALCHEMIX EP 519 / H50 is a general purpose laminating resin for laminates requiring good flexural strength. The low viscosity of ALCHEMIX EP 519 / H50 allows excellent wetting of fibres, such as carbon fibre. Learn More

    View Details

  • EP5241

    EP5241

    ALCHEMIX EP 5241 is an epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5241 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More

    View Details

  • EP5242

    EP5242

    ALCHEMIX EP 5242 is an epoxy resin specially designed for use in industrial applications requiring a strong, durable casting where low colour and high UV resistance is required. ALCHEMIX EP 5242 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More

    View Details

  • EP5243

    EP5243

    ALCHEMIX EP 5243 is a fast curing epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5243 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More

    View Details

  • EP5244

    EP5244

    ALCHEMIX EP 5244 is a water clear, UV resistant epoxy resin system suitable for large castings. The variable ratio allows the hardness to be modified so that rigid and flexible castings can be produced. Learn More

    View Details

Items 71 to 80 of 237 total

per page

Page:
  1. 6
  2. 7
  3. 8
  4. 9
  5. 10
Categories

Filter

Industry
  1. Automotive (2)
Application
  1. A translucent (1)
  2. Adhesive for Epoxy and Polyurethane modelboard. (1)
  3. Adhesive for M1300 (1)
  4. Adhesive for M301 (1)
  5. Adhesive for M651 (1)
  6. Back filling for foundry patterns (1)
  7. Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
  8. copy models (2)
  9. durability and tear strength. For general mouldmaking where a hard rigid structure is required. (1)
  10. fast reproduction models and prototypes. (1)
  11. figurines (1)
  12. figurines. (2)
  13. fixtures (1)
  14. For casting and backfilling. Good edge stability. (1)
  15. Foundry patterns (2)
  16. gas and seawater resistance is required. (1)
  17. gauges (1)
  18. Good release properties (1)
  19. Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
  20. guages (2)
  21. jigs (1)
  22. large negatives (1)
  23. Low series injection moulding tools. (1)
  24. Low to medium pressure RIM where high strength is required (1)
  25. Low to medium pressure RIM where high strength is required. (2)
  26. Low to medium pressure RIM where high thermal properties are required. Under bonnet (1)
  27. Low viscosity for detail. Pattern and modelmaking. (1)
  28. Master Patterns (1)
  29. model making (2)
  30. models (3)
  31. Moulding of complicated products with precise dimensions. Repetitive casting applications for ceramics (2)
  32. negatives (3)
  33. negatives & electroforming models. (2)
  34. negatives and fast reproduction models. Especially good in thin sections. (1)
  35. pattern making. (1)
  36. Patterns (3)
  37. Pre- fabricated frames (1)
  38. Pre- fabricated support frames and vacuum forming moulds. (1)
  39. Produces ultra fine detail and dimensional stability. (1)
  40. Prototypes (4)
  41. prototypes and bulk casting. (1)
  42. PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
  43. Reproduction models (1)
  44. Specifically for offshore uses where oil (1)
  45. Specifically formulated for vacuum forming Polycarbonate. (1)
  46. two component addition cure silicone rubber with facility to alter the shore A hardness by the use of different catalysts. There is also a blue catalyst. (1)
  47. vacuum casting machines and general mouldmaking. (2)
  48. vacuum forming tools. (1)
  49. very low shrinkage. (1)
  50. Very low viscosity modified laminating resin. (1)
  51. Very low viscosity producing good wetting of fibres and fillers. (1)
Pot Life (200g, 25°C) minutes
  1. 10-12 (1)
  2. 100 (1)
  3. 100-140 (1)
  4. 12-16 (1)
  5. 120 (4)
  6. 120-180 (2)
  7. 13-17 (2)
  8. 140-160 (1)
  9. 140-160s (2)
  10. 15 (1)
  11. 15-20 (3)
  12. 150-210 (1)
  13. 16-20 (2)
  14. 160-220 (2)
  15. 18-24 (1)
  16. 180-240 (1)
  17. 1min30 - 1min50 (1)
  18. 1min45 - 2min15 (1)
  19. 2-3 (1)
  20. 2-3 hours (1)
  21. 20 (1)
  22. 20-25 (1)
  23. 22-28 (1)
  24. 23-27 (2)
  25. 25-30 (2)
  26. 25-35 (2)
  27. 2min15 - 2min45 (2)
  28. 3-4 (3)
  29. 3-5 (1)
  30. 3.5-4.5 (2)
  31. 30-40 (2)
  32. 30-45 (1)
  33. 30-45sec (1)
  34. 30-50 (3)
  35. 30-60 (1)
  36. 300-360 (1)
  37. 35-40 (1)
  38. 35-45 (1)
  39. 3min30 - 4min30 (1)
  40. 3min45 - 4min30 (1)
  41. 4-4.5 (1)
  42. 4-5 (3)
  43. 4-6 (2)
  44. 4.5-5.5 (2)
  45. 4.5-6.5 (2)
  46. 40 (2)
  47. 40-60sec (1)
  48. 40-70 (2)
  49. 45-60 (1)
  50. 45-60sec (1)
  51. 5-6 (2)
  52. 5.5-7.5 (1)
  53. 50-60 (1)
  54. 50-60sec (4)
  55. 50-70 (3)
  56. 50-80 (1)
  57. 55-65 sec (3)
  58. 5min30 - 7min (1)
  59. 6-8 (2)
  60. 6-9 (1)
  61. 6.5-7.5 (1)
  62. 6.5-8.5 (1)
  63. 60 (5)
  64. 60-70 (2)
  65. 60-80 (1)
  66. 7-10 (1)
  67. 7-12 (1)
  68. 7-8 (1)
  69. 7-9 (2)
  70. 70-80sec (1)
  71. 70-90sec (1)
  72. 8-10 (3)
  73. 8-11 (1)
  74. 8-12 (1)
  75. 80 (1)
  76. 80-100sec (1)
  77. 80-130 (1)
  78. 80-140 (1)
  79. 85-90 (1)
  80. 9-11 (3)
  81. 9-14 (1)
  82. 90-130 (1)
  83. 95-115sec (1)
  84. > 30 (1)
  85. >8 hours (2)
  86. data (8)
  87. n/a (54)
  88. see data (2)
  89. See TDS (17)
  90. Variable (1)
Cure Time (25°C) Hours
  1. 0.5-1 (1)
  2. 1 (5)
  3. 1-2 (4)
  4. 10-15 mins (1)
  5. 10-25 mins (2)
  6. 12 (7)
  7. 12-15 mins (1)
  8. 12-16 (3)
  9. 12-18 (1)
  10. 12-24 (4)
  11. 15 mins (3)
  12. 15-20 mins (1)
  13. 15-25 mins (2)
  14. 15-30 mins (1)
  15. 15-40 mins (2)
  16. 16 (1)
  17. 16-24 (1)
  18. 18-24 (1)
  19. 2-4 (2)
  20. 20 (1)
  21. 20 - 30 mins (1)
  22. 20 mins (2)
  23. 20-25 mins (1)
  24. 20-25 mins (2)
  25. 20-30 (1)
  26. 20-40 mins (1)
  27. 20m (2)
  28. 24 (27)
  29. 24-48 (1)
  30. 24h (2)
  31. 25-30m (2)
  32. 25-35m (1)
  33. 25m (1)
  34. 3-4 (1)
  35. 3-60s (1)
  36. 30-40 mins (2)
  37. 30-50 mins (1)
  38. 30m (1)
  39. 4 (1)
  40. 4-8h (1)
  41. 45 (1)
  42. 45-55 mins (1)
  43. 45-60 mins (15)
  44. 48 (4)
  45. 5-30 sec (1)
  46. 5-60 sec (4)
  47. 50-60 mins (1)
  48. 50-70 mins (1)
  49. 6-12 (1)
  50. 6-8 (2)
  51. 60 mins (1)
  52. 60-90 mins (2)
  53. 60-90 mins (1)
  54. 8 (1)
  55. 8-12 (1)
  56. 8-14 (3)
  57. 90-120 mins (1)
  58. data (8)
  59. n/a (47)
  60. see data (2)
  61. See TDS (15)
  62. TBC (1)
  63. variable (1)
Viscosity (25°C) mPa.s
  1. 1.3k-1.4k (1)
  2. 100-300 (1)
  3. 100-350 (5)
  4. 1000-1500 (1)
  5. 10000-15000 (1)
  6. 10000-16000 (1)
  7. 100k (1)
  8. 1100-1500 (2)
  9. 120-160 (1)
  10. 120-220 (1)
  11. 12000-16000 (2)
  12. 12000-18000 (1)
  13. 140-190 (1)
  14. 1400-1700 (1)
  15. 1400-2000 (1)
  16. 140k (1)
  17. 150-250 (2)
  18. 1500 (4)
  19. 1700-2200 (1)
  20. 180-300 (1)
  21. 1800-2800 (1)
  22. 2-10 (1)
  23. 20-40 (1)
  24. 200-400 (1)
  25. 2000 (1)
  26. 2000-3000 (1)
  27. 20000-26000 (1)
  28. 2200-2600 (1)
  29. 22000-32000 (1)
  30. 2400-2800 (1)
  31. 250-350 (2)
  32. 250-450 (2)
  33. 25000-30000 (2)
  34. 260-340 (3)
  35. 280-380 (1)
  36. 300-500 (3)
  37. 300-600 (4)
  38. 3000-8000 (1)
  39. 30000-50000 (1)
  40. 30k-70k (2)
  41. 350-550 (1)
  42. 350-650 (2)
  43. 400-600 (1)
  44. 400-700 (1)
  45. 400-800 (2)
  46. 40000-60000 (1)
  47. 45-85 (1)
  48. 450-550 (1)
  49. 450-650 (4)
  50. 450-900 (1)
  51. 4500-7500 (1)
  52. 50-100 (1)
  53. 500-1000 (3)
  54. 500-1200 (1)
  55. 500-800 (2)
  56. 5000-10000 (1)
  57. 5000-5500 (1)
  58. 520 (1)
  59. 550-750 (1)
  60. 60-100 (2)
  61. 60-120 (1)
  62. 600-1000 (1)
  63. 600-800 (5)
  64. 600-850 (1)
  65. 600-900 (8)
  66. 70-90 (3)
  67. 700-1000 (1)
  68. 700-1100 (1)
  69. 700-800 (1)
  70. 700-900 (1)
  71. 7000-20000 (1)
  72. 7000-9000 (1)
  73. 750-900 (1)
  74. 80 (2)
  75. 80-100 (1)
  76. 80-120 (2)
  77. 80-140 (1)
  78. 900-1000 (1)
  79. 900-1300 (1)
  80. 900-1500 (2)
  81. data (8)
  82. liquid (2)
  83. n/a (46)
  84. Paste (6)
  85. Putty (1)
  86. See TDS (11)
  87. TBC (5)
  88. thixo (7)
  89. Viscous (1)
HDT °C
  1. 100 (5)
  2. 103-109 (1)
  3. 105 (1)
  4. 108 (1)
  5. 108-112 (1)
  6. 110 (3)
  7. 110-115 (1)
  8. 110-120 (2)
  9. 116 (1)
  10. 116-122 (1)
  11. 120 (2)
  12. 123-128 (1)
  13. 125 (2)
  14. 130 (4)
  15. 130-140 (1)
  16. 133-139 (1)
  17. 135 (1)
  18. 137-142 (1)
  19. 140 (1)
  20. 150-160 (3)
  21. 160 (1)
  22. 170 (2)
  23. 180-190 (2)
  24. 200 (1)
  25. 250 (1)
  26. 44-48 (1)
  27. 50 (2)
  28. 50-60 (2)
  29. 53-58 (1)
  30. 55 (4)
  31. 56-60 (1)
  32. 57-61 (1)
  33. 57-62 (1)
  34. 59 (1)
  35. 60 (5)
  36. 60-65 (6)
  37. 62-67 (1)
  38. 63-67 (1)
  39. 65 (1)
  40. 65-70 (4)
  41. 65-75 (1)
  42. 67-72 (1)
  43. 68 (2)
  44. 68-72 (4)
  45. 69-73 (1)
  46. 70 (1)
  47. 70-74 (2)
  48. 70-75 (2)
  49. 70-80 (1)
  50. 73 (1)
  51. 75 (2)
  52. 75-85 (1)
  53. 76-80 (1)
  54. 77-82 (1)
  55. 79-83 (1)
  56. 80 (7)
  57. 82-86 (2)
  58. 82-87 (2)
  59. 87-92 (1)
  60. 88-92 (1)
  61. 90 (2)
  62. 90-100 (1)
  63. 90-95 (3)
  64. 95 (1)
  65. 95-100 (1)
  66. data (4)
  67. n/a (66)
  68. See TDS (14)
  69. TBC (3)
Shore Hardness
  1. 10D (1)
  2. 23-27A (1)
  3. 23D (1)
  4. 30-35 (1)
  5. 35-45A (1)
  6. 36-45A (1)
  7. 36A (1)
  8. 38-42A (1)
  9. 40-45 (1)
  10. 40-45A (1)
  11. 40A (1)
  12. 40D (1)
  13. 44D (1)
  14. 48-52 (1)
  15. 49D (1)
  16. 50-55D (1)
  17. 50D (1)
  18. 54D (1)
  19. 55-60A (1)
  20. 55-65A (1)
  21. 57-63A (1)
  22. 60-64D (1)
  23. 60-65 (1)
  24. 60A (1)
  25. 60D (1)
  26. 63-67D (1)
  27. 63-68A (1)
  28. 63D (1)
  29. 65-70A (2)
  30. 65-70D (3)
  31. 66 (1)
  32. 68-72A (1)
  33. 68-73D (1)
  34. 70-75 (1)
  35. 70-75D (7)
  36. 70-80D (2)
  37. 70D (2)
  38. 72D (1)
  39. 73D (1)
  40. 74D (1)
  41. 75-80D (15)
  42. 75D (2)
  43. 76D (1)
  44. 77-82D (1)
  45. 78-80D (1)
  46. 78-82D (3)
  47. 78-83 (1)
  48. 80-82D (1)
  49. 80-84D (3)
  50. 80-85 (2)
  51. 80-85D (10)
  52. 80-90A (2)
  53. 80-90D (1)
  54. 80A (1)
  55. 80D (8)
  56. 81D (1)
  57. 82-86D (1)
  58. 82-87D (4)
  59. 82D (2)
  60. 83-87 (2)
  61. 83-87D (4)
  62. 83-88D (3)
  63. 83D (1)
  64. 85-88D (1)
  65. 85-89 (1)
  66. 85-90D (16)
  67. 85D (4)
  68. 86-88D (1)
  69. 86-90 (1)
  70. 87-92 (1)
  71. 87-92A (1)
  72. 87-92D (4)
  73. 88-92 (2)
  74. 88-93D (2)
  75. 90-95D (3)
  76. 90-98A (1)
  77. 93-97 (1)
  78. 95D (1)
  79. data (8)
  80. n/a (37)
  81. See TDS (6)
  82. TBC (2)
  83. variable (1)

Contact

Navigation

Products

© Copyright Alchemie Ltd. 2024 | Design by Affinity