Ceramics

Products that are specifically designed and formulated for use in the Ceramics industry.

Items 1 to 10 of 17 total

per page

Page:
  1. 1
  2. 2
  • 8806

    ALCHEMIX 8806 is a non reactive silicone oil used for viscosity and hardness adjustment of RTV silicone rubbers. Learn More
  • AC8710

    ALCHEMIX AC 8710 is an aqueous dispersion of acrylic polymers, primarily used as a binder for Gypsum based plasters in sculptures industry. It gives excellent strength to the plaster and reduces the fragility that is inherent to plasters. Alchemix AC8710 is white in colour therefore does not affect the base colour of the plaster and can easily be pigmented. The product works perfect even at temperatures as low as near 0°C, however the cure time increases at lower temperatures. Learn More
  • EP402

    ALCHEMIX GELCOAT EP 402 is a two component, mineral filled, brushable, room temperature curing surface coat. Also available in blue. Learn More
  • EP402B

    ALCHEMIX GELCOAT EP 402B is a two component, mineral filled, brushable, room temperature curing surface coat. Also available in White. Learn More
  • EP502

    ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More
  • PU3501

    ALCHEMIX PU 3501 is a flexible polyurethane moulding system with excellent tear strength and high elongation. ALCHEMIX PU 3501 is formulated for a broad field of applications where a high degree of flexibility and strength is required. Learn More
  • PU375

    ALCHEMIX PU 375 is a two component, low odour, prefilled fastcast polyurethane system. It has excellent detail of reproduction, fast cure and demould time. The product has low shrinkage and good machinability. Learn More
  • PU375S

    ALCHEMIX PU 375S is a two component, low odour, prefilled fastcast polyurethane system. It has excellent detail of reproduction, fast cure and demould time. The product has low shrinkage and good machinability. The system has an extended pot life to allow for larger castings up to 50 Kg. Learn More
  • R4

    ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction. Learn More
  • R7

    ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More

Items 1 to 10 of 17 total

per page

Page:
  1. 1
  2. 2