Cases for Ceramics

Products that are specifically designed and formulated for Cases for Ceramics.

6 Item(s)

per page

  • EP519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More
  • R4

    ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction. Learn More
  • R5

    ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More
  • RTV240

    ALCHEMIX RTV 240 is a two component addition cure silicone rubber with the facility to alter the Shore A hardness by the use of different catalysts. Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for the product. Learn More
  • RTV245

    ALCHEMIX RTV 245 is a two component addition cure silicone rubber used for the moulding of complicated parts with precise dimensions, repetitive casting applications, ceramics, vacuum casting moulds and general mould making. Learn More
  • RTV250

    ALCHEMIX RTV 250 is a two component addition cure silicone rubber with the facility to alter the Shore hardness by the use of different catalysts.   Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for this product. Learn More

6 Item(s)

per page