Model Making
Products that are specifically designed and formulated for use in the Model Making industry.
-
PU3548
ALCHEMIX PU 3548 is a tough, durable, polyurethane elastomer of 80 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3549
ALCHEMIX PU 3549 is a tough, durable, polyurethane elastomer of 90 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3550
ALCHEMIX PU 3550 is a tough, durable, polyurethane elastomer of 95 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3551
ALCHEMIX PU 3551 is a tough, durable, polyurethane elastomer of 85 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3580
ALCHEMIX PU 3580 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 160 kgm-3, however the foam can be over packed in the mould to give higher densities of up to 500 kgm-3. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio.
Learn More -
PU3583
ALCHEMIX PU 3583 is a two component polyurethane foam system, that when mixed gives a low density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 90 - 110 kgm, however the foam can be over packed in the mould to give higher densities of up to 180 kgm Learn More -
PU3587
ALCHEMIX PU 3587 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 180 kgm, however the foam can be over packed in the mould to give higher densities of up to 500 kgm. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio. The product is ideal for applications requiring a tough, durable foam, such as the manufacture of archery targets. Learn More -
PU3588
ALCHEMIX PU 3588 is a two component polyurethane foam system, that when mixed gives a high density, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 460 - 540 kgm-3. Learn More -
PU3604
ALCHEMIX PU 3604 is an unfilled, no odour, low viscosity two component polyurethane system to which mineral and metallic fillers can be added at variable ratios depending on the application and the required thickness of the casting. ALCHEMIX PU 3604 has excellent physical properties, most notably excellent impact resistance. ALCHEMIX PU 3604 is available as a standard cure speed version (7 - 9 minute pot life) or as a fast cure speed version (2 - 3 minute pot life). The product is pigmented black, but is available in other colours on request. Learn More -
PU3617
ALCHEMIX PU 3617 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3617 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 240 – 260 kgm-3. Learn More