Model Making
Products that are specifically designed and formulated for use in the Model Making industry.
-
EP4352
ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More -
EP4385
Two-part iron reinforced slump resistant epoxy repair system. Learn More -
EP4387W
ALCHEMIX EP 4387W is a readily pigmentable, two component epoxy putty formulated for applications such as: repair, maintenance, construction, model making and pattern making. ALCHEMIX EP 4387W is easily mixed and applied by hand and ALCHEMIX EP 4387W will bond to most substrates (metals, most plastics, rubber, ceramics, concrete, brick, wood etc) and cures at room temperature to give a tough and durable material. Once cured, the material can be machined, drilled, tapped, turned, filed, sawn, sandpapered or painted Learn More -
EP4905
ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage. The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More -
EP5243
ALCHEMIX EP 5243 is a fast curing epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5243 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More -
EP5246
ALCHEMIX EP 5246 is a fast curing epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5246 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More -
PU3543
ALCHEMIX PU 3543 is a tough, durable, polyurethane elastomer of 30 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More