Composites
Products that are specifically designed and formulated for use in the Composites industry.
-
GLASS REINFORCEMENTS
ALCHEMIX Glass reinforcements comprise of a number of different types including; surface tissue, chop strand mat, open weave scrim and uni-directional mat. The mats are of different weights and are sold by the roll or metre. For more information please contact us directly. Click here.
Learn More -
M100
Model Board M100 is a polyurethane board and block material with low density. Learn More -
R4
ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction. Learn More -
R5
ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More -
R7
ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More -
Sheetwax
Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More -
UP8960
ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More