Aerospace
Products that are specifically designed and formulated for use in the Aerospace industry.
-
EP4352
ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More -
EP4905
ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage. The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More -
EP502
ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More -
EP519
ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More -
EP571 / H3 (Fast) / H8 (Slow)
ALCHEMIX EP 571 is a high temperature laminating resin system. It has low viscosity, enabling good wetting of fibres and fillers. A superior modified resin system, possessing good heat distortion resistance, used with HARDENER H3 or H8 either singly or blended produces versatility in pot life and cure time. ALCHEMIX EP 571 is formulated for applications such as RIM tooling, marine, aerospace, vacuum forming tooling and other applications requiring high heat dimensional stability. Learn More -
EP574
ALCHEMIX EP 574 / H574 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. Learn More -
EP575
ALCHEMIX EP 575 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding chemical resistance and mechanical properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. The system is suitable for a variety of applications including hand lay up and RTM and is ideally suited for the repair of motorcycle fuel tanks. Learn More -
EP5752
ALCHEMIX EP 5752 is an ambient temperature cure epoxy system, exhibiting outstanding mechanical and thermal properties. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Three hardeners are available, allowing the working time and cure speed to be adjusted. Alternative hardeners for specific applications are available. Learn More -
EP5752 - H105
ALCHEMIX EP 5752 - H105 is an epoxy system, exhibiting excellent through cure, even at low temperatures. ALCHEMIX EP 5752 - H105 exhibits outstanding mechanical and thermal properties. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Learn More -
EP5752 - H25
ALCHEMIX EP 5752 - H25 is an ambient temperature cure epoxy system exhibiting outstanding adhesion to a wide variety of substrates including steel, aluminium, wood, mineral substrates and many plastics. The system can be used as a laminating resin to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Learn More