Aerospace

Products that are specifically designed and formulated for use in the Aerospace industry.

4 Item(s)

per page

  • EP4093

    ALCHEMIX GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required. Learn More
  • EP4905

    ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage.  The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More
  • EP502

    ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More
  • EP519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More

4 Item(s)

per page