Pattern Making
Products that are specifically designed and formulated for use in the Pattern Making industry.
-
-
UP8960
ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More -
Sheetwax
Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More -
R7
ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More -
R5
ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More -
MG651
ALCHEMIX MG 651 is an odourless two component polyurethane adhesive. The colour of ALCHEMIX MG 651 is designed to camouflage the bond line when used as an adhesive for model board M 651. Learn More -
MG480
ALCHEMIX MG 480 is a two component polyurethane system, which is specially designed with specific low-density fillers for repair and adhesion of large planks of model board M480. This low density, highly thixotropic paste when mixed with part B can be spread with a spatula for use as an adhesive for Model Board 480. Learn More -
MG301
ALCHEMIX MG 301 is a lightweight paste made with specific low density fillers. When mixed with the part B it has excellent flow characteristics. It has a high reactivity and is fast curing. Used for the adhesion of large planks of modelboard M301. A slow version, Model Board Adhesive ALCHEMIX MG 301S is also available. Learn More -
MG1300
ALCHEMIX MG 1300 is an odourless two component polyurethane adhesive. ALCHEMIX MG 1300 can also be used unfilled in prototyping and model-making areas, or filled with mineral or metallic fillers in pattern-making. The colour of MG 1300 is designed to camouflage the bond line when used as an adhesive for model board M 1300. Learn More -
M100
Model Board M100 is a polyurethane board and block material with low density. Learn More