Composites

Filter

Application

1. Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
2. Very low viscosity producing good wetting of fibres and fillers. (1)

Pot Life (200g, 25°C) minutes

1. See TDS (8)

Cure Time (25°C) Hours

1. 24 (1)
2. See TDS (7)

Viscosity (25°C) mPa.s

1. See TDS (8)

Shore Hardness

1. 82-87D (1)
2. 83-87D (1)
3. 85-90D (2)
4. See TDS (4)