Composites
Products that are specifically designed and formulated for use in the Composites industry.
-
-
UP8960
ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More -
RTV260
ALCHEMIX RTV 260 is a two component addition cure silicone rubber. Curing at room temperature the product is used for the moulding of complicated parts with precise dimensions. The cure can be accelerated by using heat. Learn More -
RTV245
ALCHEMIX RTV 245 is a two component addition cure silicone rubber used for the moulding of complicated parts with precise dimensions, repetitive casting applications, ceramics, vacuum casting moulds and general mould making. Learn More -
RTV240
ALCHEMIX RTV 240 is a two component addition cure silicone rubber with the facility to alter the Shore A hardness by the use of different catalysts. Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for the product. Learn More -
R4
ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction. Learn More -
PU3587
ALCHEMIX PU 3587 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 180 kgm, however the foam can be over packed in the mould to give higher densities of up to 500 kgm. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio. The product is ideal for applications requiring a tough, durable foam, such as the manufacture of archery targets. Learn More -
PU3583
ALCHEMIX PU 3583 is a two component polyurethane foam system, that when mixed gives a low density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 90 - 110 kgm, however the foam can be over packed in the mould to give higher densities of up to 180 kgm Learn More -
PU3580
ALCHEMIX PU 3580 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 160 kgm-3, however the foam can be over packed in the mould to give higher densities of up to 500 kgm-3. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio.
Learn More -
M160
Model Board M 160 is a low density board and block material which is easy to machine and can also be cut manually. Learn More