Aerospace
Products that are specifically designed and formulated for use in the Aerospace industry.
-
UP8960
ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More -
Sheetwax
Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More -
R5
ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More -
M100
Model Board M100 is a polyurethane board and block material with low density. Learn More -
GLASS REINFORCEMENTS
ALCHEMIX Glass reinforcements comprise of a number of different types including; surface tissue, chop strand mat, open weave scrim and uni-directional mat. The mats are of different weights and are sold by the roll or metre. For more information please contact us directly. Click here.
Learn More -
EP5941
ALCHEMIX EP 5941 is an unfilled, low viscosity, epoxy resin system formulated for adhesion of large planks of modelboard. A choice of hardeners is available, giving extremely short curing times (H5941F) or long working time (H5941). ALCHEMIX EP 5941 is specifically formulated for high temperature applications Learn More -
A87
ALCHEMIX A87 Fillite is a glass hard, inert, hollow silicate sphere. It is primarily used to reduce the weight of plastics, rubber, resin and cement etc. It also imparts further benefits in many situations. Due to spherical nature of the particles, increased filler loading and improved rheology can be obtained while using A87 Fillite. Learn More -
A85
ALCHEMIX A85 is a mineral filler consisting of Silica sand, which can be added to specific resins to alter the properties. Learn More -
A83
ALCHEMIX A83 is an aluminium powder that can be added to specific resins to alter the properties. Learn More -
8406
ALCHEMIX 8406 is a superfast Cyanoacrylate adhesive of low viscosity. It is designed for the bonding of materials that have relatively inactive surfaces and is excellent for the bonding of elastomers and rubbers with excellent humidity resistance. Learn More