Aerospace

Filter

Application

1. A translucent (1)
2. Adhesive for Epoxy and Polyurethane modelboard. (1)
3. Back filling for foundry patterns (1)
4. Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
5. fixtures (1)
6. For casting and backfilling. Good edge stability. (1)
7. gauges (1)
8. Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
9. guages (2)
10. jigs (1)
11. large negatives (1)
12. Low series injection moulding tools. (1)
13. models (2)
14. Moulding of complicated products with precise dimensions. Repetitive casting applications for ceramics (1)
15. negatives & electroforming models. (2)
16. Patterns (2)
17. Pre- fabricated frames (1)
18. Pre- fabricated support frames and vacuum forming moulds. (1)
19. PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
20. Specifically formulated for vacuum forming Polycarbonate. (1)
21. two component addition cure silicone rubber with facility to alter the shore A hardness by the use of different catalysts. There is also a blue catalyst. (1)
22. vacuum casting machines and general mouldmaking. (1)
23. vacuum forming tools. (1)
24. very low shrinkage. (1)
25. Very low viscosity modified laminating resin. (1)

Pot Life (200g, 25°C) minutes

1. 10-12 (1)
2. 100-140 (1)
3. 120 (2)
4. 120-180 (2)
5. 150-210 (1)
6. 160-220 (2)
7. 18-24 (1)
8. 180-240 (1)
9. 20-25 (1)
10. 30-50 (1)
11. 30-60 (1)
12. 300-360 (1)
13. 35-40 (1)
14. 35-45 (1)
15. 4-5 (1)
16. 40-70 (2)
17. 5-6 (1)
18. 50-60sec (1)
19. 50-70 (2)
20. 50-80 (1)
21. 60-70 (1)
22. 60-80 (1)
23. 8-10 (1)
24. 80 (1)
25. 80-130 (1)
26. 80-140 (1)
27. 95-115sec (1)
28. > 30 (1)
29. data (4)
30. n/a (27)
31. see data (1)
32. See TDS (8)

Cure Time (25°C) Hours

1. 12 (3)
2. 12-16 (3)
3. 12-24 (3)
4. 16 (1)
5. 16-24 (1)
6. 18-24 (1)
7. 20 (1)
8. 20-25 mins (1)
9. 24 (8)
10. 24-48 (1)
11. 24h (2)
12. 30m (1)
13. 5-60 sec (2)
14. 6-8 (1)
15. 60-90 mins (2)
16. 8-14 (2)
17. data (4)
18. n/a (25)
19. see data (1)
20. See TDS (10)

Viscosity (25°C) mPa.s

1. 10000-15000 (1)
2. 100k (1)
3. 1100-1500 (2)
4. 12000-16000 (2)
5. 12000-18000 (1)
6. 150-250 (1)
7. 1500 (2)
8. 180-300 (1)
9. 20-40 (1)
10. 2000-3000 (1)
11. 250-450 (1)
12. 300-600 (2)
13. 30000-50000 (1)
14. 30k-70k (2)
15. 400-800 (2)
16. 40000-60000 (1)
17. 450-650 (1)
18. 500-800 (1)
19. 60-120 (1)
20. 80-120 (1)
21. data (4)
22. n/a (25)
23. Paste (4)
24. See TDS (7)
25. thixo (6)
26. Viscous (1)

HDT °C

1. 100 (2)
2. 103-109 (1)
3. 105 (1)
4. 108 (1)
5. 108-112 (1)
6. 110 (1)
7. 110-115 (1)
8. 110-120 (2)
9. 116 (1)
10. 116-122 (1)
11. 125 (1)
12. 130 (2)
13. 133-139 (1)
14. 140 (1)
15. 150-160 (2)
16. 160 (1)
17. 170 (2)
18. 250 (1)
19. 50 (1)
20. 50-60 (2)
21. 55 (2)
22. 56-60 (1)
23. 57-61 (1)
24. 59 (1)
25. 60 (2)
26. 60-65 (1)
27. 63-67 (1)
28. 65 (1)
29. 68 (2)
30. 70 (1)
31. 70-75 (1)
32. 70-80 (1)
33. 73 (1)
34. 79-83 (1)
35. 80 (4)
36. 82-86 (1)
37. 88-92 (1)
38. 90 (1)
39. data (3)
40. n/a (13)
41. See TDS (6)
42. TBC (1)

Shore Hardness

1. 23D (1)
2. 35-45A (1)
3. 36-45A (1)
4. 40A (1)
5. 44D (1)
6. 50D (1)
7. 54D (1)
8. 66 (1)
9. 70-75D (1)
10. 70D (2)
11. 72D (1)
12. 73D (1)
13. 74D (1)
14. 75-80D (2)
15. 75D (2)
16. 76D (1)
17. 78-82D (3)
18. 80-85D (3)
19. 80D (1)
20. 81D (1)
21. 82-87D (1)
22. 82D (2)
23. 83-87 (1)
24. 83-87D (4)
25. 83D (1)
26. 85-88D (1)
27. 85-89 (1)
28. 85-90D (4)
29. 85D (1)
30. 86-90 (1)
31. 87-92 (1)
32. 87-92D (1)
33. 88-92 (1)
34. 88-93D (1)
35. 90-95D (3)
36. data (4)
37. n/a (12)
38. See TDS (4)
39. TBC (2)