Industry
Categories for relevant industry sectors.
-
EP4410 / H78
ALCHEMIX EP4410 is a two part Epoxy system formulated to cure to a high gloss surface under extreme conditions. The cured resin exhibits outstanding electrical characteristics and a high level of flame retardancy. The very low exotherm during cure enables both large and small volume mixes with only minimal shrinkage. A very low resin viscosity and surface tension facilitate easy mixing and rapid de-Airing from the mixed resin system Learn More -
EP4401 / H79
ALCHEMIX EP4401 is a two part Epoxy resin system formulated to cure to a high gloss surface under extreme conditions. The cured resin exhibits outstanding electrical characteristics and a high level of flame retardancy. Learn More -
EP4400 / H78
ALCHEMIX EP4400 is a two part Epoxy resin system formulated to cure to a high gloss surface under extreme conditions. The cured resin exhibits outstanding electrical characteristics, high level of flame retardancy and good chemical resistance. The very low exotherm during cure enables both large and small volume mixes with only minimal shrinkage. The product is approved to UL94 V-0.
*UL94-VO Yellow certificate number E213605
Learn More -
EP4387W
ALCHEMIX EP 4387W is a readily pigmentable, two component epoxy putty formulated for applications such as: repair, maintenance, construction, model making and pattern making. ALCHEMIX EP 4387W is easily mixed and applied by hand and ALCHEMIX EP 4387W will bond to most substrates (metals, most plastics, rubber, ceramics, concrete, brick, wood etc) and cures at room temperature to give a tough and durable material. Once cured, the material can be machined, drilled, tapped, turned, filed, sawn, sandpapered or painted Learn More -
EP4385
Two-part iron reinforced slump resistant epoxy repair system. Learn More -
EP4352
ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More -
EP4063
GELCOAT EP 4063 is a two component, room temperature curing surface coat. GELCOAT EP 4063 is designed for use in pre-preg carbon fibre tooling, RTM tools, RIM tools, PU moulding tools, vacuum forming moulds, negatives, applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. Learn More