- Home /
- Epoxy Resin
Epoxy Resin
Epoxy resins are ideally suited to applications requiring high strength, temperature resistance or chemical resistance. Alchemie manufacture an extensive range of two component epoxy systems for applications such as composites manufacture, tooling and mould making.
Filter
- Application
-
- Back filling for foundry patterns (1)
- Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
- fixtures (1)
- For casting and backfilling. Good edge stability. (1)
- gauges (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (2)
- jigs (1)
- large negatives (1)
- Low series injection moulding tools. (1)
- models (2)
- negatives & electroforming models. (2)
- Patterns (2)
- Pre- fabricated frames (1)
- Pre- fabricated support frames and vacuum forming moulds. (1)
- PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
- Specifically formulated for vacuum forming Polycarbonate. (1)
- vacuum forming tools. (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
-
- 100-140 (1)
- 120 (2)
- 120-180 (2)
- 15-20 (2)
- 150-210 (1)
- 160-220 (2)
- 18-24 (1)
- 180-240 (1)
- 2-3 hours (1)
- 20-25 (1)
- 25-30 (1)
- 30-50 (3)
- 30-60 (1)
- 300-360 (1)
- 35-40 (1)
- 35-45 (1)
- 40 (2)
- 40-70 (2)
- 45-60 (1)
- 50-60 (1)
- 50-70 (2)
- 50-80 (1)
- 60 (5)
- 60-70 (1)
- 60-80 (1)
- 80 (1)
- 80-130 (1)
- 85-90 (1)
- 90-130 (1)
- >8 hours (2)
- See TDS (9)
- Cure Time (25°C) Hours
- Viscosity (25°C) mPa.s
-
- 1000-1500 (1)
- 10000-15000 (1)
- 10000-16000 (1)
- 1100-1500 (2)
- 12000-16000 (2)
- 12000-18000 (1)
- 150-250 (1)
- 180-300 (1)
- 2000 (1)
- 2000-3000 (1)
- 2200-2600 (1)
- 22000-32000 (1)
- 250-450 (1)
- 25000-30000 (2)
- 300-600 (2)
- 30000-50000 (1)
- 350-650 (2)
- 40000-60000 (1)
- 450-650 (2)
- 500-1200 (1)
- 500-800 (1)
- 5000-5500 (1)
- 520 (1)
- 600-900 (1)
- 700-900 (1)
- 900-1300 (1)
- Paste (3)
- Putty (1)
- See TDS (9)
- thixo (6)
- Viscous (1)
- HDT °C
-
- 100 (2)
- 103-109 (1)
- 108-112 (1)
- 110 (2)
- 110-115 (1)
- 110-120 (2)
- 116-122 (1)
- 120 (1)
- 130 (2)
- 133-139 (1)
- 135 (1)
- 150-160 (2)
- 160 (1)
- 170 (1)
- 250 (1)
- 50-60 (2)
- 56-60 (1)
- 57-61 (1)
- 60 (3)
- 60-65 (4)
- 63-67 (1)
- 69-73 (1)
- 70-80 (1)
- 76-80 (1)
- 79-83 (1)
- 80 (2)
- 82-86 (1)
- 88-92 (1)
- 90 (1)
- 90-95 (1)
- n/a (1)
- See TDS (8)
- TBC (1)
- Shore Hardness