Vacuumforming and Thermoforming
Products that are specifically designed and formulated for Vacuum Forming and Thermo Forming
-
M640
Model Board M 640 is a medium density board and block material with very fine structure and smooth, paintable surface. It is easy to varnish and has excellent processing properties. Easy to machine and can be worked by hand. Learn More -
M1007
Model Board M 1007 is a board and block material with good heat resistance and low coefficient of thermal expansion. Learn More -
M1001
Model Board M 1001 is a board and block material with excellent physical properties, which makes it suitable for many different applications. Learn More -
EP571 / H3 (Fast) / H8 (Slow)
ALCHEMIX EP 571 is a high temperature laminating resin system. It has low viscosity, enabling good wetting of fibres and fillers. A superior modified resin system, possessing good heat distortion resistance, used with HARDENER H3 or H8 either singly or blended produces versatility in pot life and cure time. ALCHEMIX EP 571 is formulated for applications such as RIM tooling, marine, aerospace, vacuum forming tooling and other applications requiring high heat dimensional stability. Learn More -
EP4352
ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More -
EP4350
ALCHEMIX EP 4350 is a glass fibre reinforced epoxy laminating paste for use as a back filling compound in combination with GELCOAT EP 4062 and ALCHEMIX EP 4062C coupling coat. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. ALCHEMIX EP 4350 is formulated for use in RIM tools, moulds for pre-pregs and applications requiring high heat resistance. Learn More -
EP426
ALCHEMIX EP 426 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. ALCHEMIX EP 426 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings. Learn More -
EP425
ALCHEMIX EP 425 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. ALCHEMIX EP 425 is formulated to have fast cure with minimal shrinkage, and is highly polishable. Heat stability up to of 160°C can be achieved with post curing. Learn More -
EP424
ALCHEMIX EP 424 is an aluminium filled, two part epoxy casting system formulated for the construction of tools used in vacuum forming machines and the production of prototypes requiring detail and strength. ALCHEMIX EP 424 can also be used as a general purpose casting resin for situations where a high operating temperature is required. ALCHEMIX EP 424 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings Learn More -
EP4063
GELCOAT EP 4063 is a two component, room temperature curing surface coat. GELCOAT EP 4063 is designed for use in pre-preg carbon fibre tooling, RTM tools, RIM tools, PU moulding tools, vacuum forming moulds, negatives, applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. Learn More