Model Making
Products that are specifically designed and formulated for Model Making.
-
PU3546
ALCHEMIX PU 3546 is a tough, durable, polyurethane elastomer of 60 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3547
ALCHEMIX PU 3547 is a tough, durable, polyurethane elastomer of 70 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3548
ALCHEMIX PU 3548 is a tough, durable, polyurethane elastomer of 80 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3549
ALCHEMIX PU 3549 is a tough, durable, polyurethane elastomer of 90 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3550
ALCHEMIX PU 3550 is a tough, durable, polyurethane elastomer of 95 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3551
ALCHEMIX PU 3551 is a tough, durable, polyurethane elastomer of 85 Shore A, used for mould making or prototype parts requiring high tear strength and excellent abrasion resistance. Learn More -
PU3580
ALCHEMIX PU 3580 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 160 kgm-3, however the foam can be over packed in the mould to give higher densities of up to 500 kgm-3. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio.
Learn More -
PU3583
ALCHEMIX PU 3583 is a two component polyurethane foam system, that when mixed gives a low density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 90 - 110 kgm, however the foam can be over packed in the mould to give higher densities of up to 180 kgm Learn More -
PU3587
ALCHEMIX PU 3587 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 180 kgm, however the foam can be over packed in the mould to give higher densities of up to 500 kgm. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio. The product is ideal for applications requiring a tough, durable foam, such as the manufacture of archery targets. Learn More -
RTV134
ALCHEMIX RTV 134 is a two-component condensation cure, low viscosity silicone rubber. Suitable for mould making, producing replicas of polyester, epoxy resins, urethane foam and wax etc. It can precisely reproduce the shape of the original model. ALCHEMIX RTV 134 has exceptionally high tear strength and good elongation. Learn More