Foundry Patterns & Core Boxes

ALCHEMIX A83 is an aluminium powder that can be added to specific resins to alter the properties. Learn More

ALCHEMIX A85 is a mineral filler consisting of Silica sand, which can be added to specific resins to alter the properties. Learn More

ALCHEMIX A87 Fillite is a glass hard, inert, hollow silicate sphere. It is primarily used to reduce the weight of plastics, rubber, resin and cement etc. It also imparts further benefits in many situations. Due to spherical nature of the particles, increased filler loading and improved rheology can be obtained while using A87 Fillite. Learn More

ALCHEMIX A89 is an untreated fumed silica. It is a synthetic, amorphous, colloidal silicon dioxide that is generally regarded as unique because of it's unusual particle characteristics. A89's extremely small particle size, it's enormous surface area, it's high purity, and it's chain-forming tendencies set it apart in a class of it's own. A89 is a light, fluffy powder that is white in appearance and is used in many applications and in a variety of industries. Learn More

ALCHEMIX A91 is a Aluminium trihydroxide filler powder which is generally used with our fast cast resin products to alter the properties and bulk the material out. Learn More

ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More

ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More

Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More

ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More