- Home /
- Applications
Applications
Categories for relevant areas of Application.
-
EP4752 / H4752
ALCHEMIX EP 4752 is a Low viscosity Epoxy resin that offers a low exothermic reaction making it ideal for larger castings. It also possesses low surface tension. Learn More -
EP4820 / H103
ALCHEMIX EP 4820 is a low viscosity Epoxy resin system, that gives excellent chemical resistance especially against diesel fuel. It can be used at elevated temperatures and below freezing. Learn More -
EP4905
ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage. The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More -
EP502
ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More -
EP504
ALCHEMIX EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions. Learn More -
EP519
ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More -
EP519 / H50
ALCHEMIX EP 519 / H50 is a general purpose laminating resin for laminates requiring good flexural strength. The low viscosity of ALCHEMIX EP 519 / H50 allows excellent wetting of fibres, such as carbon fibre. Learn More -
EP5241
ALCHEMIX EP 5241 is an epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5241 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More -
EP5242
ALCHEMIX EP 5242 is an epoxy resin specially designed for use in industrial applications requiring a strong, durable casting where low colour and high UV resistance is required. ALCHEMIX EP 5242 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More -
EP5243
ALCHEMIX EP 5243 is a fast curing epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5243 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More
Categories
- Air Filters
- Back Filling
- Badge Doming
- Bonding
- Carbon Prepreg Tooling
- Cases for Ceramics
- Checking Fixtures
- Clear Casting
- CNC Milling
- Composites
- Concrete Moulding
- Cosmetic Carbon Fibre
- Electrical Encapsulation
- Electrical Potting
- Embedding
- Face Casting - Concrete
- Fibrous Plastering
- Foundry Patterns & Core Boxes
- Hammer Form Tools
- Hand Lay Up / Laminating
- Jigs & Fixtures
- Low Series Production
- Mannequins
- Master Patterns
- Model Making
- Mould Making
- Negatives and First Reproductions
- Offshore and Undersea
- Pad Printing
- Penny Flooring
- Plastic Injection Mould Tools
- R.I.M Component Parts
- R.I.M. Tooling
- R.T.M. Tools
- Resin Casting
- Resin Infusion
- River Tables
- Rotacasting
- Sanitaryware Moulds
- Sheetmetal Forming
- Spin Casting
- Styling Models
- Vacuum Casting
- Vacuumforming and Thermoforming
Filter
- Industry
- Application
-
- A translucent (1)
- Adhesive for Epoxy and Polyurethane modelboard. (1)
- Adhesive for M1300 (1)
- Adhesive for M301 (1)
- Adhesive for M651 (1)
- Back filling for foundry patterns (1)
- Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
- copy models (2)
- durability and tear strength. For general mouldmaking where a hard rigid structure is required. (1)
- fast reproduction models and prototypes. (3)
- figurines (3)
- figurines. (4)
- fixtures (3)
- For casting and backfilling. Good edge stability. (1)
- Foundry patterns (2)
- gas and seawater resistance is required. (1)
- gauges (1)
- General mouldmaking for producing replicas in polyester (2)
- Good release properties (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (2)
- jigs (1)
- Jigs & Fixtures (2)
- large negatives (1)
- Low series injection moulding tools. (1)
- Low to medium pressure RIM where high strength is required (1)
- Low to medium pressure RIM where high strength is required. (2)
- Low to medium pressure RIM where high thermal properties are required. Under bonnet (1)
- Low viscosity for detail. Pattern and modelmaking. (1)
- Master Patterns (3)
- model making (4)
- models (5)
- Moulding of complicated products with precise dimensions. Repetitive casting applications for ceramics (2)
- negatives (3)
- negatives & electroforming models. (2)
- negatives and fast reproduction models. Especially good in thin sections. (1)
- pattern making. (2)
- Patterns (3)
- Pre- fabricated frames (1)
- Pre- fabricated support frames and vacuum forming moulds. (1)
- Produces ultra fine detail and dimensional stability. (1)
- Prototypes (6)
- prototypes and bulk casting. (1)
- PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
- Reproduction models (1)
- Specifically for offshore uses where oil (1)
- Specifically formulated for vacuum forming Polycarbonate. (1)
- two component addition cure silicone rubber with facility to alter the shore A hardness by the use of different catalysts. There is also a blue catalyst. (1)
- vacuum casting machines and general mouldmaking. (2)
- vacuum forming tools. (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
-
- 10-12 (1)
- 100 (1)
- 100-140 (1)
- 12-16 (1)
- 120 (4)
- 120-180 (2)
- 13-17 (2)
- 140-160 (1)
- 140-160s (2)
- 15 (1)
- 15-20 (3)
- 150-210 (1)
- 16-20 (2)
- 160-220 (2)
- 18-24 (1)
- 180-240 (1)
- 1min30 - 1min50 (1)
- 1min45 - 2min15 (1)
- 2-3 (1)
- 2-3 hours (1)
- 20 (1)
- 20-25 (1)
- 22-28 (1)
- 23-27 (2)
- 25-30 (2)
- 25-35 (2)
- 2min15 - 2min45 (2)
- 3-4 (3)
- 3-5 (1)
- 3.5-4.5 (2)
- 30-40 (2)
- 30-45 (1)
- 30-45sec (1)
- 30-50 (3)
- 30-60 (1)
- 300-360 (1)
- 35-40 (1)
- 35-45 (1)
- 3min30 - 4min30 (1)
- 3min45 - 4min30 (1)
- 4-4.5 (1)
- 4-5 (3)
- 4-6 (2)
- 4.5-5.5 (2)
- 4.5-6.5 (2)
- 40 (2)
- 40-60sec (1)
- 40-70 (2)
- 45-60 (1)
- 45-60sec (1)
- 5-6 (2)
- 5-7 (1)
- 5.5-7.5 (2)
- 50-60 (1)
- 50-60sec (4)
- 50-70 (3)
- 50-80 (1)
- 55-65 sec (3)
- 5min30 - 7min (1)
- 6-8 (2)
- 6-9 (1)
- 6.5-7.5 (1)
- 6.5-8.5 (1)
- 60 (5)
- 60-70 (2)
- 60-80 (1)
- 7-10 (1)
- 7-12 (1)
- 7-8 (1)
- 7-9 (2)
- 70-80sec (1)
- 70-90sec (1)
- 8-10 (3)
- 8-11 (1)
- 8-12 (1)
- 80 (1)
- 80-100sec (1)
- 80-130 (1)
- 80-140 (1)
- 85-90 (1)
- 9-11 (3)
- 9-14 (1)
- 90-130 (1)
- 95-115sec (1)
- > 30 (1)
- >8 hours (2)
- data (8)
- n/a (55)
- see data (2)
- See TDS (17)
- Variable (1)
- Cure Time (25°C) Hours
-
- 0.5-1 (1)
- 1 (5)
- 1-2 (4)
- 10-15 mins (1)
- 10-25 mins (2)
- 12 (7)
- 12-15 mins (1)
- 12-16 (3)
- 12-18 (1)
- 12-24 (4)
- 15 mins (3)
- 15-20 mins (1)
- 15-25 mins (2)
- 15-30 mins (1)
- 15-40 mins (2)
- 16 (1)
- 16-24 (1)
- 18-24 (1)
- 2-4 (2)
- 20 (1)
- 20 - 30 mins (1)
- 20 mins (2)
- 20-25 mins (1)
- 20-25 mins (2)
- 20-30 (1)
- 20-40 mins (1)
- 20m (2)
- 24 (27)
- 24-48 (1)
- 24h (2)
- 25-30m (2)
- 25-35m (1)
- 25m (1)
- 3-4 (1)
- 3-60s (1)
- 30-40 mins (3)
- 30-50 mins (1)
- 30m (1)
- 4 (1)
- 4-8h (1)
- 45 (1)
- 45-55 mins (1)
- 45-60 mins (15)
- 48 (4)
- 5-30 sec (1)
- 5-60 sec (4)
- 50-60 mins (1)
- 50-70 mins (1)
- 6-12 (1)
- 6-8 (2)
- 60 mins (2)
- 60-90 mins (2)
- 60-90 mins (1)
- 8 (1)
- 8-12 (1)
- 8-14 (3)
- 90-120 mins (1)
- data (8)
- n/a (48)
- see data (2)
- See TDS (15)
- TBC (1)
- variable (1)
- Viscosity (25°C) mPa.s
-
- 1.3k-1.4k (1)
- 100-260 (1)
- 100-300 (1)
- 100-350 (5)
- 1000-1500 (1)
- 10000-15000 (1)
- 10000-16000 (1)
- 100k (1)
- 1100-1500 (2)
- 120-160 (1)
- 120-220 (1)
- 12000-16000 (2)
- 12000-18000 (1)
- 140-190 (1)
- 1400-1700 (1)
- 1400-2000 (1)
- 140k (1)
- 150-250 (2)
- 1500 (4)
- 1700-2200 (1)
- 180-300 (1)
- 1800-2800 (1)
- 2-10 (1)
- 20-40 (1)
- 200-400 (1)
- 2000 (1)
- 2000-3000 (1)
- 20000-26000 (1)
- 2200-2600 (1)
- 22000-32000 (1)
- 2400-2800 (1)
- 250-350 (2)
- 250-450 (3)
- 25000-30000 (2)
- 260-340 (3)
- 280-380 (1)
- 300-500 (3)
- 300-600 (4)
- 3000-8000 (1)
- 30000-50000 (1)
- 30k-70k (2)
- 350-550 (1)
- 350-650 (2)
- 400-600 (1)
- 400-700 (1)
- 400-800 (2)
- 40000-60000 (1)
- 45-85 (1)
- 450-550 (1)
- 450-650 (4)
- 450-900 (1)
- 4500-7500 (1)
- 50-100 (1)
- 500-1000 (3)
- 500-1200 (1)
- 500-800 (2)
- 5000-10000 (1)
- 5000-5500 (1)
- 520 (1)
- 550-750 (1)
- 60-100 (2)
- 60-120 (1)
- 600-1000 (1)
- 600-800 (5)
- 600-850 (1)
- 600-900 (8)
- 70-90 (3)
- 700-1000 (1)
- 700-1100 (1)
- 700-800 (1)
- 700-900 (1)
- 7000-20000 (1)
- 7000-9000 (1)
- 750-900 (1)
- 80 (2)
- 80-100 (1)
- 80-120 (2)
- 80-140 (1)
- 900-1000 (1)
- 900-1300 (1)
- 900-1500 (2)
- data (8)
- liquid (2)
- n/a (47)
- Paste (6)
- Putty (1)
- See TDS (11)
- TBC (5)
- thixo (7)
- Viscous (1)
- HDT °C
-
- 100 (5)
- 103-109 (1)
- 105 (1)
- 108 (1)
- 108-112 (1)
- 110 (3)
- 110-115 (1)
- 110-120 (2)
- 116 (1)
- 116-122 (1)
- 120 (2)
- 123-128 (1)
- 125 (2)
- 130 (4)
- 130-140 (1)
- 133-139 (1)
- 135 (1)
- 137-142 (1)
- 140 (1)
- 150-160 (3)
- 160 (1)
- 170 (2)
- 180-190 (2)
- 200 (1)
- 250 (1)
- 44-48 (1)
- 50 (2)
- 50-60 (2)
- 53-58 (1)
- 55 (4)
- 56-60 (1)
- 57-61 (1)
- 57-62 (1)
- 59 (1)
- 60 (5)
- 60-65 (6)
- 62-67 (1)
- 63-67 (1)
- 65 (1)
- 65-70 (4)
- 65-75 (1)
- 67-72 (1)
- 68 (2)
- 68-72 (4)
- 69-73 (1)
- 70 (1)
- 70-74 (2)
- 70-75 (2)
- 70-80 (1)
- 73 (1)
- 75 (2)
- 75-85 (1)
- 76-80 (1)
- 77-82 (1)
- 79-83 (1)
- 80 (7)
- 82-86 (2)
- 82-87 (2)
- 87-92 (1)
- 88-92 (1)
- 90 (2)
- 90-100 (1)
- 90-95 (3)
- 95 (1)
- 95-100 (1)
- data (4)
- n/a (67)
- See TDS (14)
- TBC (3)
- Shore Hardness
-
- 10D (1)
- 23-27A (1)
- 23D (1)
- 30-35 (1)
- 35-45A (1)
- 36-45A (1)
- 36A (1)
- 38-42A (1)
- 40-45 (1)
- 40-45A (1)
- 40A (1)
- 40D (1)
- 44D (1)
- 48-52 (1)
- 49D (1)
- 50-55D (1)
- 50D (1)
- 54D (1)
- 55-60A (1)
- 55-65A (1)
- 57-63A (1)
- 60-64D (1)
- 60-65 (1)
- 60A (1)
- 60D (1)
- 63-67D (1)
- 63-68A (1)
- 63D (1)
- 65-70A (2)
- 65-70D (3)
- 66 (1)
- 68-72A (1)
- 68-73D (1)
- 70-75 (1)
- 70-75D (7)
- 70-80D (2)
- 70D (2)
- 72D (1)
- 73D (1)
- 74D (1)
- 75-80D (15)
- 75D (2)
- 76D (1)
- 77-82D (1)
- 78-80D (1)
- 78-82D (3)
- 78-83 (1)
- 80-82D (1)
- 80-84D (3)
- 80-85 (2)
- 80-85D (10)
- 80-90A (2)
- 80-90D (1)
- 80A (1)
- 80D (8)
- 81D (1)
- 82-86D (2)
- 82-87D (5)
- 82D (2)
- 83-87 (2)
- 83-87D (4)
- 83-88D (3)
- 83D (1)
- 85-88D (1)
- 85-89 (1)
- 85-90D (16)
- 85D (4)
- 86-88D (1)
- 86-90 (1)
- 87-92 (1)
- 87-92A (1)
- 87-92D (4)
- 88-92 (2)
- 88-93D (2)
- 90-95D (3)
- 90-98A (1)
- 93-97 (1)
- 95D (1)
- data (8)
- n/a (38)
- See TDS (6)
- TBC (2)
- variable (1)