Ancillary Products

An extensive range of products and equipment to be used with Alchemie’s polyurethane and epoxy systems: pigments, fillers, release agents, fibre reinforcements, sheetwax, adhesives, safety equipment and application equipment.

Items 1 to 10 of 59 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Wax Fillet

    Radius: 1/16" - 1"

    Length: 30 ft - 3000 ft

    Learn More
  • Vacuum Casting Machine

    Alchemie Ltd are able to supply a number of different Vacuum Casting chambers and mixing equipment depending on the customer requirements. For more information please contact us directly. Learn More
  • UP8960

    ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More
  • Sheetwax

    Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More
  • R8

    ALCHEMIX R8 is a Polytetrafluoroethylene (PTFE) release agent for use on metals, wood, leather, rubber and ceramics. Release Agent R8 is especially useful as a running in lubricant for packing and for applying to gaskets to aid easy removal. Learn More
  • R7

    ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More
  • R6

    ALCHEMIX R6 is a silicone based aerosol release agent for epoxy, polyurethane, polyester and many other materials. Learn More
  • R5

    ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More
  • R4

    ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction. Learn More
  • MS651

    Model Board Sealer MS 651 is a two component epoxy system designed to coat M651 model board and other similar surfaces. The product is easily applied by brush and cures quickly at room to give a high gloss coating. Learn More

Items 1 to 10 of 59 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5