Menu

Pattern Making

Products that are specifically designed and formulated for use in the Pattern Making industry.

Items 51 to 60 of 106 total

per page

Page:
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8
  • EP5752 - H105

    EP5752 - H105

    ALCHEMIX EP 5752 - H105 is an epoxy system, exhibiting excellent through cure, even at low temperatures. ALCHEMIX EP 5752 - H105 exhibits outstanding mechanical and thermal properties. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Learn More

    View Details

  • EP5752 Laminating System Data

    EP5752 Laminating System Data

    ALCHEMIX EP 5752 is an ambient cure epoxy resins system, available with a variety of hardeners for specific applications. Full product properties can be found on the appropriate technical data sheets. Learn More

    View Details

  • EP5753 - H105

    EP5753 - H105

    ALCHEMIX EP 5753 – H105 is an epoxy system, exhibiting excellent through cure, even at low temperatures. ALCHEMIX EP 5753 – H105 exhibits outstanding mechanical and thermal properties. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Learn More

    View Details

  • EP5753 Laminating System Data

    EP5753 Laminating System Data

    ALCHEMIX EP 5753 is an ambient cure epoxy resins system, available with a variety of hardeners for specific applications. Full product properties can be found on the appropriate technical data sheets. Learn More

    View Details

  • EP5941

    EP5941

    ALCHEMIX EP 5941 is an unfilled, low viscosity, epoxy resin system formulated for adhesion of large planks of modelboard. A choice of hardeners is available, giving extremely short curing times (H5941F) or long working time (H5941). ALCHEMIX EP 5941 is specifically formulated for high temperature applications Learn More

    View Details

  • GLASS REINFORCEMENTS

    GLASS REINFORCEMENTS

    ALCHEMIX Glass reinforcements comprise of a number of different types including; surface tissue, chop strand mat, open weave scrim and uni-directional mat. The mats are of different weights and are sold by the roll or metre. For more information please contact us directly. Click here.

    Learn More

    View Details

  • Model board

    M100

    Model Board M100 is a polyurethane board and block material with low density. Learn More

    View Details

  • Model board

    M1001

    Model Board M 1001 is a board and block material with excellent physical properties, which makes it suitable for many different applications. Learn More

    View Details

  • Model board

    M1007

    Model Board M 1007 is a board and block material with good heat resistance and low coefficient of thermal expansion. Learn More

    View Details

  • Model board

    M1300

    Model Board M 1300 is a high density board and block material with especially high compressive strength, flexural strength and abrasion resistance. Learn More

    View Details

Items 51 to 60 of 106 total

per page

Page:
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8

Filter

Application
  1. Adhesive for Epoxy and Polyurethane modelboard. (1)
  2. Adhesive for M1300 (1)
  3. Adhesive for M301 (1)
  4. Adhesive for M651 (1)
  5. Back filling for foundry patterns (1)
  6. Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
  7. copy models (2)
  8. fast reproduction models and prototypes. (1)
  9. figurines (1)
  10. figurines. (2)
  11. fixtures (1)
  12. For casting and backfilling. Good edge stability. (1)
  13. Foundry patterns (2)
  14. gas and seawater resistance is required. (1)
  15. gauges (1)
  16. Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
  17. guages (1)
  18. jigs (1)
  19. large negatives (1)
  20. Low viscosity for detail. Pattern and modelmaking. (1)
  21. Master Patterns (1)
  22. model making (2)
  23. models (2)
  24. negatives (3)
  25. negatives & electroforming models. (1)
  26. negatives and fast reproduction models. Especially good in thin sections. (1)
  27. pattern making. (1)
  28. Patterns (2)
  29. Pre- fabricated frames (1)
  30. Pre- fabricated support frames and vacuum forming moulds. (1)
  31. Produces ultra fine detail and dimensional stability. (1)
  32. Prototypes (3)
  33. prototypes and bulk casting. (1)
  34. PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
  35. Reproduction models (1)
  36. Specifically for offshore uses where oil (1)
  37. vacuum forming tools. (1)
  38. very low shrinkage. (1)
  39. Very low viscosity modified laminating resin. (1)
  40. Very low viscosity producing good wetting of fibres and fillers. (1)
Pot Life (200g, 25°C) minutes
  1. 10-12 (1)
  2. 120 (1)
  3. 120-180 (2)
  4. 140-160 (1)
  5. 140-160s (2)
  6. 15-20 (1)
  7. 16-20 (1)
  8. 18-24 (1)
  9. 180-240 (1)
  10. 1min45 - 2min15 (1)
  11. 2-3 (1)
  12. 20-25 (1)
  13. 2min15 - 2min45 (1)
  14. 3-4 (2)
  15. 3-5 (1)
  16. 30-40 (1)
  17. 30-45 (1)
  18. 30-50 (1)
  19. 35-45 (1)
  20. 3min30 - 4min30 (1)
  21. 4-5 (3)
  22. 4-6 (1)
  23. 40-70 (1)
  24. 5-6 (1)
  25. 50-80 (1)
  26. 5min30 - 7min (1)
  27. 60-70 (1)
  28. 7-12 (1)
  29. 7-9 (1)
  30. 8-10 (1)
  31. 8-11 (1)
  32. 80 (1)
  33. 80-130 (1)
  34. data (1)
  35. n/a (39)
  36. see data (2)
  37. See TDS (8)
Cure Time (25°C) Hours
  1. 0.5-1 (1)
  2. 1 (1)
  3. 10-25 mins (2)
  4. 12 (3)
  5. 12-16 (1)
  6. 12-18 (1)
  7. 12-24 (3)
  8. 15-20 mins (1)
  9. 15-30 mins (1)
  10. 15-40 mins (2)
  11. 18-24 (1)
  12. 2-4 (2)
  13. 20 (1)
  14. 20-25 mins (1)
  15. 24 (6)
  16. 24h (2)
  17. 25-30m (2)
  18. 25-35m (1)
  19. 3-60s (1)
  20. 30-50 mins (1)
  21. 30m (1)
  22. 4-8h (1)
  23. 5-30 sec (1)
  24. 5-60 sec (3)
  25. 50-60 mins (1)
  26. 6-8 (1)
  27. 60-90 mins (1)
  28. 8-14 (1)
  29. data (1)
  30. n/a (34)
  31. see data (2)
  32. See TDS (7)
Viscosity (25°C) mPa.s
  1. 1000-1500 (1)
  2. 10000-15000 (1)
  3. 120-160 (1)
  4. 120-220 (1)
  5. 12000-16000 (1)
  6. 12000-18000 (1)
  7. 1400-2000 (1)
  8. 1500 (4)
  9. 180-300 (1)
  10. 2-10 (1)
  11. 20-40 (1)
  12. 2400-2800 (1)
  13. 250-350 (1)
  14. 250-450 (1)
  15. 300-600 (1)
  16. 40000-60000 (1)
  17. 45-85 (1)
  18. 50-100 (1)
  19. 60-100 (2)
  20. 60-120 (1)
  21. 70-90 (3)
  22. 7000-20000 (1)
  23. 7000-9000 (1)
  24. 80 (2)
  25. 80-120 (2)
  26. 80-140 (1)
  27. data (1)
  28. liquid (1)
  29. n/a (34)
  30. Paste (5)
  31. See TDS (8)
  32. thixo (5)
HDT °C
  1. 100 (2)
  2. 105 (1)
  3. 108 (1)
  4. 110 (1)
  5. 110-120 (2)
  6. 116 (1)
  7. 116-122 (1)
  8. 125 (2)
  9. 140 (1)
  10. 150-160 (2)
  11. 50 (1)
  12. 50-60 (1)
  13. 55 (4)
  14. 57-62 (1)
  15. 59 (1)
  16. 60 (2)
  17. 60-65 (3)
  18. 62-67 (1)
  19. 65 (1)
  20. 65-70 (1)
  21. 67-72 (1)
  22. 68 (2)
  23. 70-75 (2)
  24. 70-80 (1)
  25. 73 (1)
  26. 75 (2)
  27. 77-82 (1)
  28. 79-83 (1)
  29. 80 (6)
  30. 87-92 (1)
  31. 88-92 (1)
  32. 90 (2)
  33. 90-100 (1)
  34. 90-95 (1)
  35. 95 (1)
  36. data (1)
  37. n/a (24)
  38. See TDS (8)
  39. TBC (1)
Shore Hardness
  1. 23D (1)
  2. 40D (1)
  3. 44D (1)
  4. 50D (1)
  5. 54D (1)
  6. 57-63A (1)
  7. 63-68A (1)
  8. 63D (1)
  9. 65-70D (1)
  10. 66 (1)
  11. 70-75D (7)
  12. 70D (2)
  13. 72D (1)
  14. 75-80D (2)
  15. 75D (1)
  16. 76D (1)
  17. 78-80D (1)
  18. 78-83 (1)
  19. 80-85 (1)
  20. 80-85D (4)
  21. 80-90A (1)
  22. 80D (5)
  23. 81D (1)
  24. 82D (1)
  25. 83-87D (3)
  26. 83D (1)
  27. 85-89 (1)
  28. 85-90D (4)
  29. 85D (1)
  30. 87-92D (1)
  31. 88-92 (1)
  32. 90-95D (2)
  33. data (1)
  34. n/a (28)
  35. See TDS (4)
  36. TBC (2)

Contact

Navigation

Products

© Copyright Alchemie Ltd. 2024 | Design by Affinity