Pattern Making

Products that are specifically designed and formulated for use in the Pattern Making industry.

Items 41 to 50 of 110 total

per page

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  • EP424

    ALCHEMIX EP 424 is an aluminium filled, two part epoxy casting system formulated for the construction of tools used in vacuum forming machines and the production of prototypes requiring detail and strength. ALCHEMIX EP 424 can also be used as a general purpose casting resin for situations where a high operating temperature is required. ALCHEMIX EP 424 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings Learn More
  • EP426

    ALCHEMIX EP 426 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools.   ALCHEMIX EP 426 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings. Learn More
  • EP4350

    ALCHEMIX EP 4350 is a glass fibre reinforced epoxy laminating paste for use as a back filling compound in combination with GELCOAT EP 4062 and ALCHEMIX EP 4062C coupling coat. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. ALCHEMIX EP 4350 is formulated for use in RIM tools, moulds for pre-pregs and applications requiring high heat resistance. Learn More
  • EP4352

    ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated.   After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More
  • EP4905

    ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage.  The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More
  • EP502

    ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More
  • EP504

    ALCHEMIX EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions. Learn More
  • EP519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More
  • EP571 / H3 (Fast) / H8 (Slow)

    ALCHEMIX EP 571 is a high temperature laminating resin system. It has low viscosity, enabling good wetting of fibres and fillers. A superior modified resin system, possessing good heat distortion resistance, used with HARDENER H3 or H8 either singly or blended produces versatility in pot life and cure time. ALCHEMIX EP 571 is formulated for applications such as RIM tooling, marine, aerospace, vacuum forming tooling and other applications requiring high heat dimensional stability. Learn More
  • EP5752

    ALCHEMIX EP 5752 is an ambient temperature cure epoxy system, exhibiting outstanding mechanical and thermal properties. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Three hardeners are available, allowing the working time and cure speed to be adjusted. Alternative hardeners for specific applications are available. Learn More

Items 41 to 50 of 110 total

per page

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7