Marine
Products that are specifically designed and formulated for use in the Marine industry.
-
UP8960
ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More -
R5
ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More -
PU3720
ALCHEMIX PU 3720 is a machine-mixed polyurethane paste system that is particularly suitable for the manufacture of design / styling models, master models or parts requiring high strength combined with low density. The product is thixotropic and cures quickly, allowing the rapid build-up of layers and the printing of parts with overhanging sections. The cured material can be easily machined or worked with hand tools to give a smooth surface finish. Printing parts using ALCHEMIX PU 3720 gives a significant reduction in waste when compared to traditional methods. Learn More -
PU3619
ALCHEMIX PU 3619 is a two component polyurethane foam system, that when mixed gives a low density rigid foam. ALCHEMIX PU 3619 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 40 – 50 kgm-3. Learn More -
PU3617
ALCHEMIX PU 3617 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3617 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 240 – 260 kgm-3. Learn More -
PU3616
ALCHEMIX PU 3616 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3616 can be used for a variety of applications such as structural infill of hollow components. The foam is durable and has excellent physical properties. Typical free rise density is between 150 – 160 kgm-3. Learn More -
PU3615
ALCHEMIX PU 3615 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3615 can be used for a variety of applications such as structural infill of hollow components. The foam is durable and has excellent physical properties. Typical free rise density is between 80 - 88 kgm-3. Learn More -
PU3580
ALCHEMIX PU 3580 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 160 kgm-3, however the foam can be over packed in the mould to give higher densities of up to 500 kgm-3. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio.
Learn More -
M730
Modelboard M730 is an epoxy board material with very high temperature resistance and very low coefficient of thermal expansion making it ideal for applications where dimensional stability is essential. Learn More -
M720
Model Board M720 is an epoxy board material with very high temperature resistance and very low coefficient of thermal expansion making it ideal for applications where dimensional stability is essential. Learn More