Hobby
Products that are specifically designed and formulated for use in the Hobby industry.
-
EP5243
ALCHEMIX EP 5243 is a fast curing epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5243 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More -
EP5244
ALCHEMIX EP 5244 is a water clear, UV resistant epoxy resin system suitable for large castings. The variable ratio allows the hardness to be modified so that rigid and flexible castings can be produced. Learn More -
EP5246
ALCHEMIX EP 5246 is a fast curing epoxy resin specially designed for use in industrial applications requiring a strong, durable coating where low colour and high UV resistance is required. ALCHEMIX EP 5246 has excellent water resistance, chemical resistance, mechanical properties and excellent adhesion to a variety of substrates. Learn More -
EP575
ALCHEMIX EP 575 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding chemical resistance and mechanical properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. The system is suitable for a variety of applications including hand lay up and RTM and is ideally suited for the repair of motorcycle fuel tanks. Learn More -
EP5753
ALCHEMIX EP 5753 is an ambient temperature cure epoxy system, exhibiting outstanding mechanical and thermal properties. ALCHEMIX EP 5753 is formulated for resin infusion applications, and can also be used for resin transfer moulding (RTM), filament winding, pultrusion and wet lay up applications. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Learn More -
PU342
PU 342 is a flexible polyurethane system of 55-60 shore A, used for mould making or prototype parts requiring semi rigidity. Learn More -
PU343
ALCHEMIX PU 343 is a semi flexible polyurethane system of 87 – 92 Shore A, used for mould making or prototype parts requiring semi rigidity. Learn More -
PU3583
ALCHEMIX PU 3583 is a two component polyurethane foam system, that when mixed gives a low density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 90 - 110 kgm, however the foam can be over packed in the mould to give higher densities of up to 180 kgm Learn More -
PU3587
ALCHEMIX PU 3587 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 180 kgm, however the foam can be over packed in the mould to give higher densities of up to 500 kgm. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio. The product is ideal for applications requiring a tough, durable foam, such as the manufacture of archery targets. Learn More -
PU3604
ALCHEMIX PU 3604 is an unfilled, no odour, low viscosity two component polyurethane system to which mineral and metallic fillers can be added at variable ratios depending on the application and the required thickness of the casting. ALCHEMIX PU 3604 has excellent physical properties, most notably excellent impact resistance. ALCHEMIX PU 3604 is available as a standard cure speed version (7 - 9 minute pot life) or as a fast cure speed version (2 - 3 minute pot life). The product is pigmented black, but is available in other colours on request. Learn More