Composites
Products that are specifically designed and formulated for use in the Composites industry.
-
-
UP8960
ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More -
Sheetwax
Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More -
RTV260
ALCHEMIX RTV 260 is a two component addition cure silicone rubber. Curing at room temperature the product is used for the moulding of complicated parts with precise dimensions. The cure can be accelerated by using heat. Learn More -
RTV245
ALCHEMIX RTV 245 is a two component addition cure silicone rubber used for the moulding of complicated parts with precise dimensions, repetitive casting applications, ceramics, vacuum casting moulds and general mould making. Learn More -
RTV240
ALCHEMIX RTV 240 is a two component addition cure silicone rubber with the facility to alter the Shore A hardness by the use of different catalysts. Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for the product. Learn More -
R7
ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More -
R5
ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More -
R4
ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction. Learn More -
PU3720
ALCHEMIX PU 3720 is a machine-mixed polyurethane paste system that is particularly suitable for the manufacture of design / styling models, master models or parts requiring high strength combined with low density. The product is thixotropic and cures quickly, allowing the rapid build-up of layers and the printing of parts with overhanging sections. The cured material can be easily machined or worked with hand tools to give a smooth surface finish. Printing parts using ALCHEMIX PU 3720 gives a significant reduction in waste when compared to traditional methods. Learn More