Aerospace

Products that are specifically designed and formulated for use in the Aerospace industry.

Items 1 to 10 of 74 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • UP8960

    ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More
  • Sheetwax

    Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More
  • RTV250

    ALCHEMIX RTV 250 is a two component addition cure silicone rubber with the facility to alter the Shore hardness by the use of different catalysts.   Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for this product. Learn More
  • RTV245

    ALCHEMIX RTV 245 is a two component addition cure silicone rubber used for the moulding of complicated parts with precise dimensions, repetitive casting applications, ceramics, vacuum casting moulds and general mould making. Learn More
  • RTV240

    ALCHEMIX RTV 240 is a two component addition cure silicone rubber with the facility to alter the Shore A hardness by the use of different catalysts. Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for the product. Learn More
  • R5

    ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More
  • PU3825S

    ALCHEMIX PU 3825S is a two component polyurethane system, which is designed for use in low pressure Reaction Injection Moulding (RIM) equipment. The system is ideal for rapid prototyping and limited production runs using metering machines, with or without vacuum. ALCHEMIX PU 3825S is a system which is formulated to simulate high density polyethylene. Learn More
  • PU3825

    ALCHEMIX PU 3825 is a two component polyurethane system, which is designed for use in low pressure Reaction Injection Moulding (RIM) equipment. The system is ideal for rapid prototyping and limited production runs using metering machines, with or without vacuum. ALCHEMIX PU 3825 is a neutral, pigmentable system which is formulated to simulate high density polyethylene. Learn More
  • PU376S

    ALCHEMIX PU 376S is a two component low odour polyurethane system to which specific dry fillers have already been added. The system has an extended pot life to allow for larger castings up to 50 Kg. The material is ideal for making resin moulds and vacuum forming tools. Learn More
  • PU376

    ALCHEMIX PU 376 is a two component, low odour, prefilled fastcast polyurethane system. Prefilled with special metallic fillers. Easy processing and low viscosity prevents air entrapment. Extremely high Tg post cure ensures stability at high temperatures. It has a good surface finish and is easily polishable. Learn More

Items 1 to 10 of 74 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5