Industry

Categories for relevant industry sectors.

Items 1 to 10 of 46 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Wax Fillet

    Radius: 1/16" - 1"

    Length: 30 ft - 3000 ft

    Learn More
  • Sheetwax

    Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More
  • RTV201

    ALCHEMIX RTV 201 is a thixotropic agent to be used with ALCHEMIX RTV240. When added to the silicone mixture it will thicken the material depending on how much agent is added. Learn More
  • R8

    ALCHEMIX R8 is a Polytetrafluoroethylene (PTFE) release agent for use on metals, wood, leather, rubber and ceramics. Release Agent R8 is especially useful as a running in lubricant for packing and for applying to gaskets to aid easy removal. Learn More
  • R7

    ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More
  • R6

    ALCHEMIX R6 is a silicone based aerosol release agent for epoxy, polyurethane, polyester and many other materials. Learn More
  • R5

    ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More
  • Metapor

    Metapor is microporous, air-permeable aluminium modelboard that delivers advanced solutions for many thermoforming applications. It eliminates the need to drill vacuum holes, expanding technical capabilities of the thermoforming process at low cost. Metapor material has consistent porosity which offers unparalleled design flexibility and new ways to optimise performance of thermoform tooling. Available in 500x500mm and in a number of depths. Learn More
  • M840

    Model Board M 840 is a board and block material with very high heat resistance. Developed specifically for high temperature applications. Learn More
  • M770G

    Model Board M 770G is a medium density board and block material with very fine structure and smooth surface. It is easy to varnish and has excellent processing properties. Learn More

Items 1 to 10 of 46 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5