Epoxy Resin

Epoxy resins are ideally suited to applications requiring high strength, temperature resistance or chemical resistance. Alchemie manufacture an extensive range of two component epoxy systems for applications such as composites manufacture, tooling and mould making.

8 Item(s)

per page

  • EP 4093

    ALCHEMIX GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required. Learn More
  • EP 4385

    Two-part iron reinforced slump resistant epoxy repair system. Learn More
  • EP 4517

    ALCHEMIX EP 4517 ? H4517 is a two part, ambient temperature cure, liquid epoxy system; exhibiting outstanding thermal dissipation and electrical characteristics. This system has remarkably low mixed viscosity and when cured shows good electrical properties even at elevated temperatures. Learn More
  • EP 4905

    ALCHEMIX EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage.  The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. Learn More
  • EP 502

    ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More
  • EP 504

    ALCHEMIX EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions. Learn More
  • EP 519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More
  • EP 519 / H50

    ALCHEMIX EP 519 / H50 is a general purpose laminating resin for laminates requiring good flexural strength. The low viscosity of ALCHEMIX EP 519 / H50 allows excellent wetting of fibres, such as carbon fibre. Learn More

8 Item(s)

per page