- Home /
- Epoxy Resin
Epoxy Resin
Epoxy resins are ideally suited to applications requiring high strength, temperature resistance or chemical resistance. Alchemie manufacture an extensive range of two component epoxy systems for applications such as composites manufacture, tooling and mould making.
-
EP5753 Laminating System Data
ALCHEMIX EP 5753 is an ambient cure epoxy resins system, available with a variety of hardeners for specific applications. Full product properties can be found on the appropriate technical data sheets. Learn More -
EP596
ALCHEMIX EP 596 is a low viscosity epoxy resin system specifically formulated for use in demanding industrial applications such as heavy duty corrosion protection, structural adhesives and civil engineering. It has a long working time, but will cure at low temperatures and in damp conditions, enabling it to be used in many different environments. Learn More -
MS651
Model Board Sealer MS 651 is a two component epoxy system designed to coat M651 model board and other similar surfaces. The product is easily applied by brush and cures quickly at room to give a high gloss coating. Learn More
Filter
- Application
-
- Back filling for foundry patterns (1)
- Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
- fixtures (1)
- For casting and backfilling. Good edge stability. (1)
- gauges (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (2)
- jigs (1)
- large negatives (1)
- Low series injection moulding tools. (1)
- models (2)
- negatives & electroforming models. (2)
- Patterns (2)
- Pre- fabricated frames (1)
- Pre- fabricated support frames and vacuum forming moulds. (1)
- PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
- Specifically formulated for vacuum forming Polycarbonate. (1)
- vacuum forming tools. (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
-
- 100-140 (1)
- 120 (2)
- 120-180 (2)
- 15-20 (2)
- 150-210 (1)
- 160-220 (2)
- 18-24 (1)
- 180-240 (1)
- 2-3 hours (1)
- 20-25 (1)
- 25-30 (1)
- 30-50 (3)
- 30-60 (1)
- 300-360 (1)
- 35-40 (1)
- 35-45 (1)
- 40 (2)
- 40-70 (2)
- 45-60 (1)
- 50-60 (1)
- 50-70 (2)
- 50-80 (1)
- 60 (5)
- 60-70 (1)
- 60-80 (1)
- 80 (1)
- 80-130 (1)
- 85-90 (1)
- 90-130 (1)
- >8 hours (2)
- See TDS (9)
- Cure Time (25°C) Hours
- Viscosity (25°C) mPa.s
-
- 1000-1500 (1)
- 10000-15000 (1)
- 10000-16000 (1)
- 1100-1500 (2)
- 12000-16000 (2)
- 12000-18000 (1)
- 150-250 (1)
- 180-300 (1)
- 2000 (1)
- 2000-3000 (1)
- 2200-2600 (1)
- 22000-32000 (1)
- 250-450 (1)
- 25000-30000 (2)
- 300-600 (2)
- 30000-50000 (1)
- 350-650 (2)
- 40000-60000 (1)
- 450-650 (2)
- 500-1200 (1)
- 500-800 (1)
- 5000-5500 (1)
- 520 (1)
- 600-900 (1)
- 700-900 (1)
- 900-1300 (1)
- Paste (3)
- Putty (1)
- See TDS (9)
- thixo (6)
- Viscous (1)
- HDT °C
-
- 100 (2)
- 103-109 (1)
- 108-112 (1)
- 110 (2)
- 110-115 (1)
- 110-120 (2)
- 116-122 (1)
- 120 (1)
- 130 (2)
- 133-139 (1)
- 135 (1)
- 150-160 (2)
- 160 (1)
- 170 (1)
- 250 (1)
- 50-60 (2)
- 56-60 (1)
- 57-61 (1)
- 60 (3)
- 60-65 (4)
- 63-67 (1)
- 69-73 (1)
- 70-80 (1)
- 76-80 (1)
- 79-83 (1)
- 80 (2)
- 82-86 (1)
- 88-92 (1)
- 90 (1)
- 90-95 (1)
- n/a (1)
- See TDS (8)
- TBC (1)
- Shore Hardness