Epoxy Resin

Epoxy resins are ideally suited to applications requiring high strength, temperature resistance or chemical resistance. Alchemie manufacture an extensive range of two component epoxy systems for applications such as composites manufacture, tooling and mould making.

Items 1 to 10 of 21 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • EP4063

    GELCOAT EP 4063 is a two component, room temperature curing surface coat. GELCOAT EP 4063 is designed for use in pre-preg carbon fibre tooling, RTM tools, RIM tools, PU moulding tools, vacuum forming moulds, negatives, applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. Learn More
  • EP4352

    ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated.   After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More
  • EP4385

    Two-part iron reinforced slump resistant epoxy repair system. Learn More
  • EP4387W

    ALCHEMIX EP 4387W is a readily pigmentable, two component epoxy putty formulated for applications such as: repair, maintenance, construction, model making and pattern making. ALCHEMIX EP 4387W is easily mixed and applied by hand and ALCHEMIX EP 4387W will bond to most substrates (metals, most plastics, rubber, ceramics, concrete, brick, wood etc) and cures at room temperature to give a tough and durable material. Once cured, the material can be machined, drilled, tapped, turned, filed, sawn, sandpapered or painted Learn More
  • EP4400 / H78

    ALCHEMIX EP4400 is a two part Epoxy resin system formulated to cure to a high gloss surface under extreme conditions. The cured resin exhibits outstanding electrical characteristics, high level of flame retardancy and good chemical resistance.  The very low exotherm during cure enables both large and small volume mixes with only minimal shrinkage. The product is approved to UL94 V-0.

    *UL94-VO Yellow certificate number E213605

    Learn More
  • EP4401 / H79

    ALCHEMIX EP4401 is a two part Epoxy resin system formulated to cure to a high gloss surface under extreme conditions.  The cured resin exhibits outstanding electrical characteristics and a high level of flame retardancy. Learn More
  • EP4410 / H78

    ALCHEMIX EP4410 is a two part Epoxy system formulated to cure to a high gloss surface under extreme conditions.  The cured resin exhibits outstanding electrical characteristics and a high level of flame retardancy.  The very low exotherm during cure enables both large and small volume mixes with only minimal shrinkage. A very low resin viscosity and surface tension facilitate easy mixing and rapid de-Airing from the mixed resin system Learn More
  • EP4511 / H4511

    ALCHEMIX EP4511 is a two part, ambient temperature cure, liquid epoxy system; exhibiting outstanding thermal dissipation and electrical characteristics, and a high level of flame retardancy. This system has remarkably low mixed viscosity and when cured shows good electrical properties even at elevated temperatures. This system has coloured hardener to give visual indication of thorough mixing. Learn More
  • EP4515 / H4515

    ALCHEMIX EP4515 is a two part system exhibiting outstanding thermal dissipation characteristics, and a high level of flame retardancy. The mixed system has a remarkably low mixed viscosity and cures at ambient temperatures to a flexible product. Learn More
  • EP4517

    ALCHEMIX EP 4517 / H4517 is a two part, ambient temperature cure, liquid epoxy system; exhibiting outstanding thermal dissipation and electrical characteristics. This system has remarkably low mixed viscosity and when cured shows good electrical properties even at elevated temperatures. Learn More

Items 1 to 10 of 21 total

per page

Page:
  1. 1
  2. 2
  3. 3