Master Patterns

Filter

Application

1. Back filling for foundry patterns (1)
2. Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
3. fast reproduction models and prototypes. (2)
4. figurines (2)
5. figurines. (2)
6. fixtures (3)
7. General mouldmaking for producing replicas in polyester (2)
8. Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
9. guages (2)
10. jigs (1)
11. Jigs & Fixtures (2)
12. large negatives (1)
13. Master Patterns (2)
14. model making (2)
15. models (3)
16. negatives & electroforming models. (1)
17. pattern making. (1)
18. Patterns (1)
19. Pre- fabricated frames (1)
20. Pre- fabricated support frames and vacuum forming moulds. (1)
21. Produces ultra fine detail and dimensional stability. (1)
22. Prototypes (2)
23. prototypes and bulk casting. (1)
24. Reproduction models (1)
25. Specifically formulated for vacuum forming Polycarbonate. (1)
26. vacuum forming tools. (1)
27. very low shrinkage. (1)
28. Very low viscosity modified laminating resin. (1)

Pot Life (200g, 25°C) minutes

1. 100-140 (1)
2. 120 (1)
3. 120-180 (2)
4. 15-20 (1)
5. 18-24 (1)
6. 20-25 (1)
7. 2min15 - 2min45 (1)
8. 3min30 - 4min30 (1)
9. 5-7 (1)
10. 5.5-7.5 (1)
11. 5min30 - 7min (1)
12. 8-10 (1)
13. 8-11 (1)
14. 80-130 (1)
15. n/a (13)
16. See TDS (6)

Cure Time (25°C) Hours

1. 10-25 mins (1)
2. 12 (3)
3. 12-16 (2)
4. 12-24 (2)
5. 15-40 mins (1)
6. 18-24 (1)
7. 2-4 (1)
8. 24 (2)
9. 30-40 mins (1)
10. 50-60 mins (1)
11. 60 mins (1)
12. 60-90 mins (1)
13. n/a (13)
14. See TDS (4)

Viscosity (25°C) mPa.s

1. 100-260 (1)
2. 1000-1500 (1)
3. 10000-15000 (1)
4. 120-220 (1)
5. 12000-16000 (1)
6. 12000-18000 (1)
7. 180-300 (1)
8. 250-450 (1)
9. 300-600 (1)
10. 40000-60000 (1)
11. 50-100 (1)
12. 60-100 (2)
13. n/a (13)
14. Paste (2)
15. See TDS (5)
16. thixo (1)

HDT °C

1. 100 (1)
2. 105 (1)
3. 130 (2)
4. 160 (1)
5. 170 (1)
6. 50-60 (1)
7. 55 (2)
8. 60 (1)
9. 60-65 (1)
10. 62-67 (1)
11. 68 (2)
12. 70-75 (2)
13. 70-80 (1)
14. 73 (1)
15. 75 (1)
16. 79-83 (1)
17. 80 (2)
18. 87-92 (1)
19. 88-92 (1)
20. 90 (1)
21. 90-95 (1)
22. n/a (2)
23. See TDS (4)

Shore Hardness

1. 40D (1)
2. 66 (1)
3. 70-75D (2)
4. 70D (2)
5. 72D (1)
6. 73D (1)
7. 74D (1)
8. 75-80D (2)
9. 75D (2)
10. 76D (1)
11. 80-85 (1)
12. 80-85D (1)
13. 82-86D (1)
14. 82-87D (1)
15. 83-87D (3)
16. 83D (1)
17. 85-90D (1)
18. 86-90 (1)
19. 87-92D (1)
20. 88-93D (1)
21. 90-95D (2)
22. n/a (2)
23. See TDS (3)
24. TBC (1)