Jigs & Fixtures

Products that are specifically designed and formulated for Jigs and Fixtures.

8 Item(s)

per page

  • A87

    ALCHEMIX A87 Fillite is a glass hard, inert, hollow silicate sphere. It is primarily used to reduce the weight of plastics, rubber, resin and cement etc. It also imparts further benefits in many situations. Due to spherical nature of the particles, increased filler loading and improved rheology can be obtained while using A87 Fillite. Learn More
  • M1001

    Model Board M 1001 is a board and block material with excellent physical properties, which makes it suitable for many different applications. Learn More
  • M1007

    Model Board M 1007 is a board and block material with good heat resistance and low coefficient of thermal expansion. Learn More
  • M400

    Model Board M 400 is a board and block material with low density and fine, homogeneous surface for general mould making applications. Models Board M400 is conveniently machinable and can also be processed manually. Learn More
  • M450

    Model Board M450 is a board and block material with low density, excellent processing properties and a fine, homogeneous surface. Model Board M450 is conveniently machinable and can also be processed manually. Learn More
  • M480

    Model Board M 480 is a board and block material with low density and fine, homogeneous surface for general mould making applications. Models Board M 480 is conveniently machinable and can also be processed manually. Learn More
  • R5

    ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More
  • Sheetwax

    Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More

8 Item(s)

per page