Jigs & Fixtures

Products that are specifically designed and formulated for Jigs and Fixtures.

Items 1 to 10 of 22 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • Sheetwax

    Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More
  • R5

    ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More
  • PU376S

    ALCHEMIX PU 376S is a two component low odour polyurethane system to which specific dry fillers have already been added. The system has an extended pot life to allow for larger castings up to 50 Kg. The material is ideal for making resin moulds and vacuum forming tools. Learn More
  • PU3691

    ALCHEMIX PU 3691 is an unfilled, no odour, low viscosity two component polyurethane system to which specific dry fillers can be added in either the suggested or variable ratios depending on the application and the required thickness of the casting.  Can be used to produce ultra-fine detail in model-making, or as a low viscosity casting resin for pattern-making. Learn More
  • PU3676

    ALCHEMIX PU 3676 is a low viscosity, two component polyurethane system which can be used to produce patterns, moulds, models and prototypes with excellent fine detail replication. ALCHEMIX PU 3676 can be filled with mineral or metallic fillers for reduced shrinkage, and has rapid demould times even when cast in thin sections. Learn More
  • PU3675

    ALCHEMIX PU 3675 is a low viscosity, two component polyurethane system which can be used to produce patterns, moulds, models and prototypes with excellent fine detail replication. ALCHEMIX PU 3675 can be filled with mineral or metallic fillers for reduced shrinkage, and has rapid demould times even when cast in thin sections. Learn More
  • PU3672

    ALCHEMIX PU 3672 is an unfilled, no odour, low viscosity two component fastcast polyurethane system to which specific dry fillers can be added in either the suggested or variable ratios depending on the application and the required thickness of the casting.  Can be used to produce ultra-fine detail in model-making, or as a low viscosity casting resin for pattern-making. Learn More
  • PU3670

    ALCHEMIX PU 3670 is an unfilled, no odour, low viscosity two component polyurethane system to which mineral and metallic fillers can be added in either the suggested or variable ratios depending on the application and the required thickness of the casting. ALCHEMIX PU 3670 can be used to produce ultra-fine detail in model-making, or as a low viscosity casting resin for pattern-making. Learn More
  • PU3652

    ALCHEMIX PU 3652 is an unfilled two component polyurethane system, which has no odour and very low viscosity. Mineral and metallic fillers may be added to it in variable ratios depending on the casting thickness. This economical casting resin can be used to produce ultra-fine details in model making or as a low viscosity casting resin for pattern making. ALCHEMIX PU 3652 is recommended for use in open moulds. Learn More
  • PU365

    ALCHEMIX PU 365 is an unfilled polyurethane casting system for the manufacture of patterns, moulds, models and prototypes. ALCHEMIX PU 365 can be cast against wet or damp substrates such as dental alginate and can be filled with mineral or metallic fillers for reduced shrinkage. Learn More

Items 1 to 10 of 22 total

per page

Page:
  1. 1
  2. 2
  3. 3