- Home /
- Applications /
- Hand Lay Up / Laminating
Hand Lay Up / Laminating
Products that are specifically designed and formulated for Hand Lay Up and Laminating.
-
EP4093
ALCHEMIX GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required. Learn More
Filter
- Application
-
- Back filling for foundry patterns (1)
- fixtures (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (1)
- jigs (1)
- large negatives (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
- Cure Time (25°C) Hours
- Viscosity (25°C) mPa.s
- HDT °C
- Shore Hardness