Foundry Patterns & Core Boxes

Products that are specifically designed and formulated for Foundry Patterns and Core Boxes.

Items 31 to 34 of 34 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • R7

    ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More
  • Sheetwax

    Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More
  • UP8960

    ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More
  • Wax Fillet

    Radius: 1/16" - 1"

    Length: 30 ft - 3000 ft

    Learn More

Items 31 to 34 of 34 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4