Back Filling

Products that are specifically designed and formulated for Back Filling.

Items 11 to 20 of 20 total

per page

Page:
  1. 1
  2. 2
  • EP519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More
  • PU3580

    ALCHEMIX PU 3580 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 160 kgm-3, however the foam can be over packed in the mould to give higher densities of up to 500 kgm-3. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio.

    Learn More
  • PU3587

    ALCHEMIX PU 3587 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 - 180 kgm, however the foam can be over packed in the mould to give higher densities of up to 500 kgm. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio. The product is ideal for applications requiring a tough, durable foam, such as the manufacture of archery targets. Learn More
  • PU3588

    ALCHEMIX PU 3588 is a two component polyurethane foam system, that when mixed gives a high density, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 460 - 540 kgm-3. Learn More
  • PU3615

    ALCHEMIX PU 3615 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3615 can be used for a variety of applications such as structural infill of hollow components. The foam is durable and has excellent physical properties. Typical free rise density is between 80 - 88 kgm-3. Learn More
  • PU3615F

    ALCHEMIX PU 3615F is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3615F can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 80 – 88 kgm-3. ALCHEMIX PU 3615F is available unpigmented or in black. Learn More
  • PU3616

    ALCHEMIX PU 3616 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3616 can be used for a variety of applications such as structural infill of hollow components. The foam is durable and has excellent physical properties. Typical free rise density is between 150 – 160 kgm-3. Learn More
  • PU3617

    ALCHEMIX PU 3617 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3617 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 240 – 260 kgm-3. Learn More
  • PU3691

    ALCHEMIX PU 3691 is an unfilled, no odour, low viscosity two component polyurethane system to which specific dry fillers can be added in either the suggested or variable ratios depending on the application and the required thickness of the casting.  Can be used to produce ultra-fine detail in model-making, or as a low viscosity casting resin for pattern-making. Learn More
  • PU3710

    ALCHEMIX PU 3710 is a low density, two component polyurethane system which can be used to produce patterns, artwork, models and prototypes. The cured product is lightweight, strong, durable and has high temperature resistance. Learn More

Items 11 to 20 of 20 total

per page

Page:
  1. 1
  2. 2