Applications
Categories for relevant areas of Application.
-
-
UP8960
ALCHEMIX UP8960 is a two component polyester paste used for filling/repairing holes or imperfections in the surfaces of steel, aluminium or GRP tools. Learn More -
Sheetwax
Alchemix high temperature Sheetwax was developed for use with casting and laminating resins that either require or give off heat during curing. This Sheetwax is a scientific blend of materials that provides a flexible sheet that will melt at temperatures in excess of 126°C. Alchemie Sheetwax can be used as a material thickness in the forming of patterns or dies. The high temperature stability permits laminating or casting a hollow core in plastic. After the plastic has been cast around the wax and cured, the wax can be readily melted from the part. PROPERTIES - Adhesive backed with pressure sensitive coating on one side. Ring ball softening range appx. 134°C to 140°C. Colour : Tan Flexibility : easily formed around tight compound curves (care should be taken when applying, that the wax thickness is not reduced). Learn More -
RTV201
ALCHEMIX RTV 201 is a thixotropic agent to be used with ALCHEMIX RTV240. When added to the silicone mixture it will thicken the material depending on how much agent is added. Learn More -
R8
ALCHEMIX R8 is a Polytetrafluoroethylene (PTFE) release agent for use on metals, wood, leather, rubber and ceramics. Release Agent R8 is especially useful as a running in lubricant for packing and for applying to gaskets to aid easy removal. Learn More -
R7
ALCHEMIX R7 is a wax based liquid release agent, which is free of chlorohydrocarbons and silicone. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 90°C without melting and boiling. Learn More -
R6
ALCHEMIX R6 is a silicone based aerosol release agent for epoxy, polyurethane, polyester and many other materials. Learn More -
R5
ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling. Learn More -
R4
ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction. Learn More -
MG651
ALCHEMIX MG 651 is an odourless two component polyurethane adhesive. The colour of ALCHEMIX MG 651 is designed to camouflage the bond line when used as an adhesive for model board M 651. Learn More