- Home /
- Applications
Applications
Categories for relevant areas of Application.
-
A91
ALCHEMIX A91 is a Aluminium trihydroxide filler powder which is generally used with our fast cast resin products to alter the properties and bulk the material out. Learn More -
AC8710
ALCHEMIX AC 8710 is an aqueous dispersion of acrylic polymers, primarily used as a binder for Gypsum based plasters in sculptures industry. It gives excellent strength to the plaster and reduces the fragility that is inherent to plasters. Alchemix AC8710 is white in colour therefore does not affect the base colour of the plaster and can easily be pigmented. The product works perfect even at temperatures as low as near 0°C, however the cure time increases at lower temperatures. Learn More -
Crystal Cast 1000
Crystal Cast 1000 is a mercury-free, two component thermoset system which is water clear when cured. Crystal Cast 1000 is ideal for rapid prototyping, embedding or any type of clear casting application.
Learn More -
Crystal Cast 2000
Crystal Cast 2000 is a mercury-free, two component thermoset system which is water clear when cured. Crystal Cast 2000 is ideal for rapid prototyping, embedding or any type of clear casting application.
Learn More -
Crystal Cast 3000
Crystal Cast 3000 is a mercury free thermoset system which is water clear when cured. Crystal Cast 3000 is ideal for bulk casting applications such as artwork, sculptures, embedding decorative objects and other similar applications. Learn More -
Crystal Cast 4000
Water clear, mercury-free, UV stable casting resin for bulk castings. Coming Soon. Learn More -
EP401
ALCHEMIX GELCOAT EP 401 is a two component, iron filled, brushable, room temperature curing surface coat. GELCOAT EP 401 is designed for use in polyurethane foam moulds, resin injection moulds, foundry patterns and vacuum forming tools. Learn More -
EP402GREEN
GELCOAT EP 402 Green is a two component, mineral filled, brushable, room temperature curing surface coat. GELCOAT EP 402 Green is designed for use in patterns, models, gauges, negatives and electro forming tools. Learn More -
EP404
ALCHEMIX GELCOAT EP 404 is a two component, silicon carbide filled, brushable, room temperature curing surface coat. The product has a high abrasion resistance and cannot be machined. Learn More -
EP4062
GELCOAT EP 4062 is a two component, aluminium filled, brushable, room temperature curing surface coat. It is designed for use in RTM tools, RIM tools, PU moulding tools, vacuum forming moulds, negatives, applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. Learn More
Categories
- Air Filters
- Back Filling
- Badge Doming
- Bonding
- Carbon Prepreg Tooling
- Cases for Ceramics
- Checking Fixtures
- Clear Casting
- CNC Milling
- Composites
- Concrete Moulding
- Cosmetic Carbon Fibre
- Electrical Encapsulation
- Electrical Potting
- Embedding
- Face Casting - Concrete
- Fibrous Plastering
- Foundry Patterns & Core Boxes
- Hammer Form Tools
- Hand Lay Up / Laminating
- Jigs & Fixtures
- Low Series Production
- Mannequins
- Master Patterns
- Model Making
- Mould Making
- Negatives and First Reproductions
- Offshore and Undersea
- Pad Printing
- Penny Flooring
- Plastic Injection Mould Tools
- R.I.M Component Parts
- R.I.M. Tooling
- R.T.M. Tools
- Resin Casting
- Resin Infusion
- River Tables
- Rotacasting
- Sanitaryware Moulds
- Sheetmetal Forming
- Spin Casting
- Styling Models
- Vacuum Casting
- Vacuumforming and Thermoforming
Filter
- Industry
- Application
-
- A translucent (1)
- Adhesive for Epoxy and Polyurethane modelboard. (1)
- Adhesive for M1300 (1)
- Adhesive for M301 (1)
- Adhesive for M651 (1)
- Back filling for foundry patterns (1)
- Best selling resin system for Vacuum forming tools. large volumes can be cast with slow hardener. (1)
- copy models (2)
- durability and tear strength. For general mouldmaking where a hard rigid structure is required. (1)
- fast reproduction models and prototypes. (3)
- figurines (3)
- figurines. (4)
- fixtures (3)
- For casting and backfilling. Good edge stability. (1)
- Foundry patterns (2)
- gas and seawater resistance is required. (1)
- gauges (1)
- General mouldmaking for producing replicas in polyester (2)
- Good release properties (1)
- Good wetting and impregnating. Pot life and cure time can be varied by using a mixture of H3 & H8 keeping the same mixing ratio. This can be used for thicker laminates. (1)
- guages (2)
- jigs (1)
- Jigs & Fixtures (2)
- large negatives (1)
- Low series injection moulding tools. (1)
- Low to medium pressure RIM where high strength is required (1)
- Low to medium pressure RIM where high strength is required. (2)
- Low to medium pressure RIM where high thermal properties are required. Under bonnet (1)
- Low viscosity for detail. Pattern and modelmaking. (1)
- Master Patterns (3)
- model making (4)
- models (5)
- Moulding of complicated products with precise dimensions. Repetitive casting applications for ceramics (2)
- negatives (3)
- negatives & electroforming models. (2)
- negatives and fast reproduction models. Especially good in thin sections. (1)
- pattern making. (2)
- Patterns (3)
- Pre- fabricated frames (1)
- Pre- fabricated support frames and vacuum forming moulds. (1)
- Produces ultra fine detail and dimensional stability. (1)
- Prototypes (6)
- prototypes and bulk casting. (1)
- PU Foam Injection Tools. RIM Tools Foundry Patterns and Thermo-forming tools. (1)
- Reproduction models (1)
- Specifically for offshore uses where oil (1)
- Specifically formulated for vacuum forming Polycarbonate. (1)
- two component addition cure silicone rubber with facility to alter the shore A hardness by the use of different catalysts. There is also a blue catalyst. (1)
- vacuum casting machines and general mouldmaking. (2)
- vacuum forming tools. (1)
- very low shrinkage. (1)
- Very low viscosity modified laminating resin. (1)
- Very low viscosity producing good wetting of fibres and fillers. (1)
- Pot Life (200g, 25°C) minutes
-
- 10-12 (1)
- 100 (1)
- 100-140 (1)
- 12-16 (1)
- 120 (4)
- 120-180 (2)
- 13-17 (2)
- 140-160 (1)
- 140-160s (2)
- 15 (1)
- 15-20 (3)
- 150-210 (1)
- 16-20 (2)
- 160-220 (2)
- 18-24 (1)
- 180-240 (1)
- 1min30 - 1min50 (1)
- 1min45 - 2min15 (1)
- 2-3 (1)
- 2-3 hours (1)
- 20 (1)
- 20-25 (1)
- 22-28 (1)
- 23-27 (2)
- 25-30 (2)
- 25-35 (2)
- 2min15 - 2min45 (2)
- 3-4 (3)
- 3-5 (1)
- 3.5-4.5 (2)
- 30-40 (2)
- 30-45 (1)
- 30-45sec (1)
- 30-50 (3)
- 30-60 (1)
- 300-360 (1)
- 35-40 (1)
- 35-45 (1)
- 3min30 - 4min30 (1)
- 3min45 - 4min30 (1)
- 4-4.5 (1)
- 4-5 (3)
- 4-6 (2)
- 4.5-5.5 (2)
- 4.5-6.5 (2)
- 40 (2)
- 40-60sec (1)
- 40-70 (2)
- 45-60 (1)
- 45-60sec (1)
- 5-6 (2)
- 5-7 (1)
- 5.5-7.5 (2)
- 50-60 (1)
- 50-60sec (4)
- 50-70 (3)
- 50-80 (1)
- 55-65 sec (3)
- 5min30 - 7min (1)
- 6-8 (2)
- 6-9 (1)
- 6.5-7.5 (1)
- 6.5-8.5 (1)
- 60 (5)
- 60-70 (2)
- 60-80 (1)
- 7-10 (1)
- 7-12 (1)
- 7-8 (1)
- 7-9 (2)
- 70-80sec (1)
- 70-90sec (1)
- 8-10 (3)
- 8-11 (1)
- 8-12 (1)
- 80 (1)
- 80-100sec (1)
- 80-130 (1)
- 80-140 (1)
- 85-90 (1)
- 9-11 (3)
- 9-14 (1)
- 90-130 (1)
- 95-115sec (1)
- > 30 (1)
- >8 hours (2)
- data (8)
- n/a (54)
- see data (2)
- See TDS (17)
- Variable (1)
- Cure Time (25°C) Hours
-
- 0.5-1 (1)
- 1 (5)
- 1-2 (4)
- 10-15 mins (1)
- 10-25 mins (2)
- 12 (7)
- 12-15 mins (1)
- 12-16 (3)
- 12-18 (1)
- 12-24 (4)
- 15 mins (3)
- 15-20 mins (1)
- 15-25 mins (2)
- 15-30 mins (1)
- 15-40 mins (2)
- 16 (1)
- 16-24 (1)
- 18-24 (1)
- 2-4 (2)
- 20 (1)
- 20 - 30 mins (1)
- 20 mins (2)
- 20-25 mins (1)
- 20-25 mins (2)
- 20-30 (1)
- 20-40 mins (1)
- 20m (2)
- 24 (27)
- 24-48 (1)
- 24h (2)
- 25-30m (2)
- 25-35m (1)
- 25m (1)
- 3-4 (1)
- 3-60s (1)
- 30-40 mins (3)
- 30-50 mins (1)
- 30m (1)
- 4 (1)
- 4-8h (1)
- 45 (1)
- 45-55 mins (1)
- 45-60 mins (15)
- 48 (4)
- 5-30 sec (1)
- 5-60 sec (4)
- 50-60 mins (1)
- 50-70 mins (1)
- 6-12 (1)
- 6-8 (2)
- 60 mins (2)
- 60-90 mins (2)
- 60-90 mins (1)
- 8 (1)
- 8-12 (1)
- 8-14 (3)
- 90-120 mins (1)
- data (8)
- n/a (47)
- see data (2)
- See TDS (15)
- TBC (1)
- variable (1)
- Viscosity (25°C) mPa.s
-
- 1.3k-1.4k (1)
- 100-260 (1)
- 100-300 (1)
- 100-350 (5)
- 1000-1500 (1)
- 10000-15000 (1)
- 10000-16000 (1)
- 100k (1)
- 1100-1500 (2)
- 120-160 (1)
- 120-220 (1)
- 12000-16000 (2)
- 12000-18000 (1)
- 140-190 (1)
- 1400-1700 (1)
- 1400-2000 (1)
- 140k (1)
- 150-250 (2)
- 1500 (4)
- 1700-2200 (1)
- 180-300 (1)
- 1800-2800 (1)
- 2-10 (1)
- 20-40 (1)
- 200-400 (1)
- 2000 (1)
- 2000-3000 (1)
- 20000-26000 (1)
- 2200-2600 (1)
- 22000-32000 (1)
- 2400-2800 (1)
- 250-350 (2)
- 250-450 (3)
- 25000-30000 (2)
- 260-340 (3)
- 280-380 (1)
- 300-500 (3)
- 300-600 (4)
- 3000-8000 (1)
- 30000-50000 (1)
- 30k-70k (2)
- 350-550 (1)
- 350-650 (2)
- 400-600 (1)
- 400-700 (1)
- 400-800 (2)
- 40000-60000 (1)
- 45-85 (1)
- 450-550 (1)
- 450-650 (4)
- 450-900 (1)
- 4500-7500 (1)
- 50-100 (1)
- 500-1000 (3)
- 500-1200 (1)
- 500-800 (2)
- 5000-10000 (1)
- 5000-5500 (1)
- 520 (1)
- 550-750 (1)
- 60-100 (2)
- 60-120 (1)
- 600-1000 (1)
- 600-800 (5)
- 600-850 (1)
- 600-900 (8)
- 70-90 (3)
- 700-1000 (1)
- 700-1100 (1)
- 700-800 (1)
- 700-900 (1)
- 7000-20000 (1)
- 7000-9000 (1)
- 750-900 (1)
- 80 (2)
- 80-100 (1)
- 80-120 (2)
- 80-140 (1)
- 900-1000 (1)
- 900-1300 (1)
- 900-1500 (2)
- data (8)
- liquid (2)
- n/a (46)
- Paste (6)
- Putty (1)
- See TDS (11)
- TBC (5)
- thixo (7)
- Viscous (1)
- HDT °C
-
- 100 (5)
- 103-109 (1)
- 105 (1)
- 108 (1)
- 108-112 (1)
- 110 (3)
- 110-115 (1)
- 110-120 (2)
- 116 (1)
- 116-122 (1)
- 120 (2)
- 123-128 (1)
- 125 (2)
- 130 (4)
- 130-140 (1)
- 133-139 (1)
- 135 (1)
- 137-142 (1)
- 140 (1)
- 150-160 (3)
- 160 (1)
- 170 (2)
- 180-190 (2)
- 200 (1)
- 250 (1)
- 44-48 (1)
- 50 (2)
- 50-60 (2)
- 53-58 (1)
- 55 (4)
- 56-60 (1)
- 57-61 (1)
- 57-62 (1)
- 59 (1)
- 60 (5)
- 60-65 (6)
- 62-67 (1)
- 63-67 (1)
- 65 (1)
- 65-70 (4)
- 65-75 (1)
- 67-72 (1)
- 68 (2)
- 68-72 (4)
- 69-73 (1)
- 70 (1)
- 70-74 (2)
- 70-75 (2)
- 70-80 (1)
- 73 (1)
- 75 (2)
- 75-85 (1)
- 76-80 (1)
- 77-82 (1)
- 79-83 (1)
- 80 (7)
- 82-86 (2)
- 82-87 (2)
- 87-92 (1)
- 88-92 (1)
- 90 (2)
- 90-100 (1)
- 90-95 (3)
- 95 (1)
- 95-100 (1)
- data (4)
- n/a (67)
- See TDS (13)
- TBC (3)
- Shore Hardness
-
- 10D (1)
- 23-27A (1)
- 23D (1)
- 30-35 (1)
- 35-45A (1)
- 36-45A (1)
- 36A (1)
- 38-42A (1)
- 40-45 (1)
- 40-45A (1)
- 40A (1)
- 40D (1)
- 44D (1)
- 48-52 (1)
- 49D (1)
- 50-55D (1)
- 50D (1)
- 54D (1)
- 55-60A (1)
- 55-65A (1)
- 57-63A (1)
- 60-64D (1)
- 60-65 (1)
- 60A (1)
- 60D (1)
- 63-67D (1)
- 63-68A (1)
- 63D (1)
- 65-70A (2)
- 65-70D (3)
- 66 (1)
- 68-72A (1)
- 68-73D (1)
- 70-75 (1)
- 70-75D (7)
- 70-80D (2)
- 70D (2)
- 72D (1)
- 73D (1)
- 74D (1)
- 75-80D (15)
- 75D (2)
- 76D (1)
- 77-82D (1)
- 78-80D (1)
- 78-82D (3)
- 78-83 (1)
- 80-82D (1)
- 80-84D (3)
- 80-85 (2)
- 80-85D (10)
- 80-90A (2)
- 80-90D (1)
- 80A (1)
- 80D (8)
- 81D (1)
- 82-86D (2)
- 82-87D (5)
- 82D (2)
- 83-87 (2)
- 83-87D (4)
- 83-88D (3)
- 83D (1)
- 85-88D (1)
- 85-89 (1)
- 85-90D (16)
- 85D (4)
- 86-88D (1)
- 86-90 (1)
- 87-92 (1)
- 87-92A (1)
- 87-92D (4)
- 88-92 (2)
- 88-93D (2)
- 90-95D (3)
- 90-98A (1)
- 93-97 (1)
- 95D (1)
- data (8)
- n/a (38)
- See TDS (5)
- TBC (2)
- variable (1)
Recently Viewed Products