| POLYURETHANE – Unfilled Rigid Systems |
POLYURETHANE |
DESCRIPTION |
POT-LIFE
MINUTES
@
25 deg C
|
PACK
SIZE |
VISCOSITY
mPa.s
@
25 deg C
|
HARDNESS
AFTER 48 Hrs |
APPLICATION |
| PU 362 A + B |
Two component,
unfilled with ultra low viscosity to which dry fillers can be added.
|
4 |
10 kg 48 kg |
15-20 |
Shore D 68 |
General casting
where high filling is required. |
| PU 363 A + B |
Two component,
low odour
polyurethane system which contains no hazardous solvents with a quick demould time, good
flow properties, and excellent surface detail and finish. |
140 sec –
160 sec |
2 kg,
10 Kg or 40 Kg |
80 |
Shore D
70-75 |
Prototypes, model making,
negatives, figurines, pattern making. |
| PU 364 A + B |
Two component,
low odour,
polyurethane system which is designed for thin sections or casting to 20mm thick. The
material has a very quick demould time and is designed to be used unfilled. |
110 sec –
130 sec |
2 Kg
or
10 kg |
30 – 40 |
Shore D
70 – 75 |
Prototypes, model making,
figurines. |
| PU 365 A + B |
Very good model reproduction of
the mould, fast cure, low exothermic reaction and low shrinkage. |
4 – 5 |
10 Kg or
50 Kg |
40 – 55 |
Shore D
69 |
Foundry patterns, copy models,
negatives, fast reproduction models and prototypes. |
| PU 3651 A + B |
Ultra low
viscosity, odourless, with very low shrinkage. |
4 |
10 kg |
30-60 |
Shore D 70-75 |
Prototypes,
patterns, models, negatives, figurines. |
| PU 3652 A + B |
Ultra low
viscosity, odourless, with very low shrinkage. |
4 |
10 kg |
20-40 |
Shore D 70-80 |
Prototypes,
patterns, models, negatives, figurines. |
| PU 3660A + B |
Two component,
U.V. stable, hand casting polyurethane system which is optically clear when cured. Ideal for rapid prototyping,
embedding or any type of clear casting with or without a vacuum. |
15 - 20 |
1.555 kg |
250 |
Shore D
80 |
For optically clear
models |
| PU 3660 SA + SB |
This material is the same as
PU3660 but for larger castings. PU366S has a much
longer pot life and demould time reducing exotherm and shrinkage. |
50 - 60 |
|
250 |
Shore D
80 |
For large
optically clear model. |
| PU 3663 A + B |
Water clear
semi flexible system with good adhesion strength and UV stability |
25-30 |
2 kg |
70-100 |
Shore A
60 |
For potting and
embedding of components. Simulates clear water. |
| PU 3664 A + B |
As 3663 but
needs to be cured at 50°c. Offers optical clarity without the need for
vacuum. |
45-55 @ 50°c |
2kg |
80-110 |
Shore A
50 |
For potting and
embedding of components. Simulates clear water. |
| PU 3666 A + B |
A self de
gassing, UV stable system with optical clarity designed specifically for
Badge Doming applications |
8 - 12 |
TBA |
80 - 180 |
Shore D
50 - 60 |
Badge
Doming |
| PU 3667 A + B |
A self de
gassing, UV stable system with optical clarity designed specifically for
Badge Doming applications |
8 -12 |
TBA |
80 - 180 |
Shore D
70 - 80 |
Badge Doming |
| PU 3670 A + B |
odourless PU
system with high level of dimensional stability |
5 |
10 kg
50 kg |
50-60 |
Shore D 75-80 |
Produces ultra
fine detail and dimensional stability. |
| PU 3672 A + B |
odourless PU
system with high level of dimensional stability easily pigmented. |
5 |
10 kg |
20-40 |
Shore D 75-80 |
Low viscosity
for detail. Pattern and modelmaking. |
| PU 368 A + B |
Two component, odourless
polyurethane system to which specific dry fillers can be added. The high flexural strength
of this product ensures that parts with thin sections are very strong and not brittle.
Extremely high Tg ensures thermal stability at high temperature. Very low and time stable
shrinkage. |
3 – 4 |
10 Kg |
300 |
Shore D 76 – 80 |
Foundry patterns, master
patterns, copy models, negatives and fast reproduction models. Especially good in thin
sections. |
| PU 369 A + B |
Two component, odourless
polyurethane system to which specific dry fillers can be added in either the suggested or
variable ratio depending on the application. Large volumes of material can be cast in one
go. (up to 10kgs) Long pot life. |
15 |
10 Kg or
50 Kg |
200 - 250 |
Shore D
76 |
Fast reproduction models.
Prototypes can be degassed for use as masters for figurines. |
| PU 3691 A + B |
Similar to 369
but with lower viscosity |
10-11 |
50 kg |
40-60 |
Shore D 80 |
Reproduction
models, prototypes and bulk casting. |
| PU 3692 A + B |
Two component
low viscosity system to which dry fillers can be added. An extended pot
life for bulk casting |
45 - 55 |
10kg
50kg |
150 - 250 |
Shore D
70 - 80 |
Reproduction
models, prototypes and bulk casting. |
| PU 3693 A + B |
Two component
low viscosity system to which dry fillers can be added. An extended pot
life for bulk casting |
15 - 20 |
10kg
50kg |
150 - 250 |
Shore D
70 - 80 |
Reproduction
models, prototypes and bulk casting. |
