| POLYURETHANE – Rigid Filled Systems |
POLYURETHANE |
DESCRIPTION |
POT-LIFE MINUTES
@
25 deg C
|
PACK SIZE |
VISCOSITY
mPa.s
@
25 deg C
|
HARDNESS
SHORE D
AFTER 48 Hrs
|
APPLICATION |
| PU 375 A + B |
Two component, low odour,
prefilled polyurethane system. It has excellent detail of reproduction, fast cure and
demould time. The product has low shrinkage and good machinability. |
4 – 5 |
1.15 Kg
10.35 Kg
28.75 Kg |
1500 |
80 |
Foundry patterns, copy models,
fast reproduction moulds and prototypes. |
| PU375SA + B |
Two component, low odour,
prefilled polyurethane system. This system has an extended pot life for larger castings up
to 50kg. |
10 – 12 |
4 x 9 kg
5.4 kg
28.75 kg |
1500 |
75 – 80 |
Foundry patterns, copy moulds,
extended pot life for larger castings. |
| PU 376 A + B |
Two component, low odour,
prefilled polyurethane system. Prefilled with special metallic fillers.
Processing and low viscosity prevents air entrapment.
Extremely high Tg post cure ensures stability at high temperatures. It has a good surface finish and is easily
polishable. |
4 – 5 |
1.15 Kg |
1500 |
82 |
Production of prototype
vacuum forming moulds, foundry patterns,
copy moulds, fast reproduction moulds and prototypes. |
| PU 376SA+ B |
As PU376 but with extended pot
life to facilitate the large castings up to 100 kgs MINIMUM RECOMMENDED THICKNESS IS 15mm |
10 – 12 |
8.05 kg |
1500 |
82 |
Production of prototype vacuum
forming moulds, foundry patterns, copy moulds, fast reproduction moulds & prototypes. |
| PU 3761 A + B |
As 376 but with
improved adhesive properties & lower viscosity. |
2-3 |
1.15kg |
200-400 |
70-75 |
|
| PU 377 A + B |
Two component, low odour
polyurethane system filled with particularly abrasion resistant powders. Very good
detailed reproduction and fast curing with low exothermic reaction. Low and time stable
shrinkage. |
4 – 5 |
1.15 Kg |
1500 |
82 |
Foundry patterns, copy models,
fast reproduction moulds and prototypes. Ideal where high abrasion resistance is required. |
