| EPOXY
GELCOATS |
RESIN
&
HARDENER |
DESCRIPTION |
POT-LIFE
MINUTES
@
25 deg C |
PACK
SIZES |
VISCOSITY
mPa.s
@
25 deg C |
SHORE D
HARDNESS |
APPLICATIONS |
EP401
H 401 |
BLACK - high temperature
stability –abrasion resistant & easy to machine. |
40 |
1 Kg |
Thixotropic |
90 |
PU Foam Injection Tools. RIM
Tools Foundry Patterns and Thermo-forming tools. |
EP402 EP402B
H 402 |
WHITE/BLUE - Hard but machinable
– good edge stability - polishable. |
30 |
1.1 Kg or 5.5 Kg |
Thixotropic |
88 |
Patterns, models, gauges,
negatives & electroforming models. |
EP403
H 403 |
RED - very hard - Good abrasion
resistance – not machinable. |
30 |
1.1 Kg |
Thixotropic |
87 |
Foundry patterns, jigs &
fixtures, copying models & where extra hard surfaces are required. |
EP404
H 404 |
BLUE – Abrasion resistant,
with good dimensional stability, zero water absorption, difficult to machine. |
30 |
1.1 Kg or 5.5 Kg |
Thixotropic |
87 |
Copying models, masking frames,
jigs, gauges & spot checking fixtures. |
| EP4041 |
Blue - mineral
filled with good heat resistance and resistance to solvents. |
50 |
1.1 kg
5.5 kg |
Thixotropic |
90 |
RIM, PU FOAM,
Vacuum Forming tools. Patterns requiring chemical resistance |
EP405
H 405
|
GREY – Aluminium filled,high
heat resistance, brushable - machinable. Good chemical resistance |
15 - 20 |
10 Kg
1 Kg |
Paste |
85 |
Negatives,
where very fine finishes are required. Applications that require high
heat resistance 160°c. |
EP407
H 407 |
GREEN - Heat resistant, good edge
stability, repairable and polishes to a good finish. |
35 |
1.1 Kg |
Thixotropic |
87 |
Polyurethane RIM and RTM Tooling. |
| EP4092 |
CLEAR -
unfilled with good chemical resistance and high HDT |
15-20 |
1.2 kg |
Thixotropic |
90 |
Surface coat
for carbon fibre. PU foam injection, RIM and Vacuum forming tools. |
