| CASTING
COMPOUNDS - Epoxy |
RESIN &
HARDENER |
DESCRIPTION |
POT-LIFE
MINUTES
@
25 deg C |
PACK
SIZES |
VISCOSITY
mPa.s
@
25 deg C |
SHORE D
HARDNESS |
APPLICATIONS |
EP 420
H 420 |
Grey - Heat resistant, hard
machinable casting compound. |
70 |
10.5 Kg |
250000 - 350000 |
88 |
Pre- fabricated frames, vacuum
forming tools. |
| EP421 H421 |
Grey, very high
heat resistance (250°c) and compression strength following post cure. |
90-120 |
TBA |
Low |
87 |
low series
injection moulding tools. |
EP 424
H 424 H
424(Slow) |
Grey - Heat resistant aluminium
filled casting compound. |
30 |
5.3 Kg 1.5 Kg |
32000 |
87 |
Pre- fabricated support frames
and vacuum forming moulds. |
| EP 425 H425 |
Grey -
Aluminium filled with very high HDT (160°C) |
100 - 140 |
5.5 kg |
1400 - 1800 |
91 |
Specifically
formulated for vacuum forming Polycarbonate. |
| EP 426 H426 or
H426S |
Grey -
Aluminium filled with high HDT (80°) |
120-180
180 - 240 |
5.3 kg 10.6 kg |
9000 - 14000 |
90-95 |
Best selling
resin system for Vacuum forming tools. large volumes can be cast with
slow hardener. |
| EP 4905 H4905 |
White low
viscosity, low shrinkage good abrasion resistance. |
120 |
6.66 kg |
14000 |
90 |
For casting and
backfilling. Good edge stability. |
