ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength.

ALCHEMIX EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions.

ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc.

ALCHEMIX EP 519 / H50 is a general purpose laminating resin for laminates requiring good flexural strength. The low viscosity of ALCHEMIX EP 519 / H50 allows excellent wetting of fibres, such as carbon fibre.

ALCHEMIX EP 521 is a three part epoxy laminating system consisting of Resin, Hardener and Accelerator. The product has very low initial viscosity, low shrinkage and excellent reproduction of detail. Rate of cure may be adjusted by altering the quantity of Accelerator.

ALCHEMIX EP 522 is a ultra low viscosity epoxy resin system, specifically designed for vacuum bagging and resin infusion applications. The ultra low viscosity produces excellent wetting of fibre reinforcements such as glass, carbon or aramid fibre.

ALCHEMIX EP 571 is a high temperature laminating resin system. It has low viscosity, enabling good wetting of fibres and fillers. A superior modified resin system, possessing good heat distortion resistance, used with HARDENER H3 or H8 either singly or blended produces versatility in pot life and cure time. ALCHEMIX EP 571 is formulated for applications such as RIM tooling, marine, aerospace, vacuum forming tooling and other applications requiring high heat dimensional stability. ALCHEMIX EP571 is a two part laminating and casting resin.  Low viscosity producing good wetting of fibres and fillers. A superior modified resin system possessing good heat distortion resistance, used with Hardeners H3 or H8 either singly or blended produces versatility in Pot Life and Cure Time.

ALCHEMIX EP 574 / H574 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc.

ALCHEMIX EP 575 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. The system is suitable for a variety of applications including hand lay up and RTM.

ALCHEMIX EP 5751 / H15 is a two part, ambient temperature cure, epoxy system, exhibiting outstanding mechanical and thermal properties. This system has remarkably low mixed viscosity and when cured shows good material properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc.

• Composites
• Cosmetic Carbon Fibre
• Hand Lay Up / Laminating
• Master Patterns
• Model Making
• Sanitaryware Moulds

• Composites
• Hand Lay Up / Laminating

• Back Filling
• Cases for Ceramics
• Composites
• Hand Lay Up / Laminating

• Cosmetic Carbon Fibre

• Cases for Ceramics
• Composites
• Foundry Patterns & Core Boxes
• Sanitaryware Moulds

• Composites
• R.T.M. Tools
• Resin Infusion

• Composites
• Hand Lay Up / Laminating
• Master Patterns
• R.I.M. Tooling
• Vacuumforming and Thermoforming

• Carbon Prepreg Tooling
• Composites
• Hand Lay Up / Laminating
• R.I.M. Tooling
• R.T.M. Tools

• Composites
• R.I.M. Tooling
• R.T.M. Tools
• Vacuumforming and Thermoforming

• Composites
• Hand Lay Up / Laminating
• Master Patterns
• Vacuumforming and Thermoforming

Download EP 502 Technical Data ( pdf )

Download EP 504 Technical Data ( pdf )

Download EP 519 Technical Data ( pdf )

Download EP 519 / H50 Technical Data ( pdf )

Download EP 521 / H521 / A521 Technical Data ( pdf )

Download EP 522 Technical Data ( pdf )

Download EP 571 / H3 (Fast) / H8 (Slow) Technical Data ( pdf )

Download EP 574 Technical Data ( pdf )

Download EP 575 Technical Data ( pdf )

Download EP 5751/H15 Technical Data ( pdf )